iD Pro R600

The smartest and brightest network centric single-chip DLP projector with SXGA+ resolution and an amazing brightness level of 6,000 ANSI lumens.

This product is no longer available.
Please consult Barco's current product offering.

Light Output6,000 ANSI lumens
ResolutionSXGA+ (1400 x 1050)
Brightness uniformity> 95 % for the total screen
Contrast ratio2,000 : 1 (full white/full black)
Display1-chip 0.95" DarkChip3™ DLP™ SXGA+ panel, with a native resolution of 1400 x 1050 pixels, 4:3 aspect ratio
Features
  • AutoImage
  • Advanced picture-in-picture
  • Seamless switching with effects
  • Standard cable basket
Picture-in-pictureUp to 3 sources simultaneously
Inputs
  • 1x Component Video, RGBHV, RGBS or RGsB (5 BNC)
  • 1x Composite Video (BNC)
  • 1x S-Video (4-pin mini-DIN)
  • 1x VGA (D15 connector)
  • 1x DVI (Digital Visual Interface)
  • 1x SDI optional

Audio connections:
  • 1x Stereo mic in
  • 1x Stereo line in
  • 1x Stereo line out
OutputsNo output
Communication1x D9 connectors for RS232 In/Out
1x spherical IR receiver
Compatibility
  • All current video sources (PAL, SECAM, NTSC) in Composite, S-VHS, Component or RGB formats
  • All currently proposed HDTV, extended and improved television standards (1080i, 720p)
  • All computer graphics formats from VGA, SVGA, XGA, SXGA to UXGA
  • Most Macintosh computers
  • Electronic workstations with a resolution up to 1600 x 1200 pixels at 75 Hz
  • Most computer sources with a pixel clock up to 160 MHz
  • DVI sources up to SXGA+
Input source compatibility1600 x 1200 (max. input)
Screen sizeFrom 1-6m / 3-20ft.
Scan FrequenciesHorizontal 15kHz - 110 kHz
Vertical 25 Hz - 150 Hz
Network connection1 x 10/100 Base-T Ethernet
On board display serverServer Specifications:
- Processor: Pentium M 1,6 GHz
- Memory: 512 MB DDR RAM
- Storage: 40 GB hard disk
- Inputs and outputs:
  • PCMCIA slot for Wireless LAN cards, memory cards, Bluetooth, input extensions ...
  • RJ45connector for Ethernet (10Mb/s) and Fast Ethernet (100Mb/s)
  • 4 USB connectors
  • Audio: 3,5 mm jacks for Microphone in, Line in and Line out
Ambient temperature5°C up to 40°C
Lamp2 x 250 Watt UHP lamp, in lamp housing, pre-aligned for max. light output.
Typical lifetime: 1,500 h/lamp.
1,500 hours in Dual Lamp Mode or 3,000 hours in Single Lamp Mode.
Lenses

Fixed focal length lens with a throw ratio of 0.8:1
Variable focal length lenses with a throw distance of 1.1-1.3, 1.2-1.6, 1.6-2.4, 2.4-4.3 times the screen width

Lens ShiftMotorized V shift: -30% +110%

For specific details per lens type: see lens product pages
Lens encodersNot Applicable
ScenergiXNot Applicable
Sealed DLP™ coreNot Applicable
Dust filtersHigh Quality Microfilter (side removeable)
Noise Level< 41 dB
Mains Voltage90V-255V
Power consumptionMax. 680 Watt
Power DissipationMax. 2400 BTU/hour
AC powerPower factor pre-regulated SMPS,
90-254 VAC / 50-60Hz
WeightNet weight:
body only: 13.5 kg/29.8 lbs
DimensionsProjector body with cable basket:
415 mm (max. W) x 195 mm (max. H) x 565 (max. D)
Projector body without cable basket:
415 mm(max. W) x 195 mm (max. H) x 487 (max. D)
Safety RegulationsCompliant with UL1950 and EN60950
Electromagnetic InterferenceCompliant with FCC rules & regulations, part 15 Class B, CE EN55022 Class B and CCC
|

More information

Order number:

  • R9010350
    (iD Pro R600)

Lens Calculator

Lens calculator

Find the ideal lens for your projector setup in just a few clicks.

Launch