Releases

MediCal QAWeb Agent

• Version 1.12.02 (April 2013)
  Recommended update solving some issues and adding support for new Barco displays
  
  • Support for new displays: MDCG-3221, MDCC-6230, MDNC-3321, MDRC-1119 HB
  • This QAWeb Agent version requires QAWeb Relay version 1.10 or higher to be installed
  • Fixed issues:
    • Enlarged patch for MFGD-5621 HB could be drawn in the wrong location on the screen
    • Visual test window does not appear when running the test as scheduled or through a remote action
    • Systray application does not start after upgrade to QAWeb Agent v1.12.01
    • QAWeb Agent background process does not start properly after upgrade to QAWeb Agent v1.12.01
    • MQSA Compliance test will not wake up displays if no Mammography displays are attached

• Version 1.12.01 (October 2012)
  Several bug fixes and optimizations:
  
  • Optimization of the DIN 6868-57 protocol
  • Fixes some issues with support for new displays
  • Fixed a scheduling issue with the MQSA Compliance Test

• Version 1.12 (May 2012)
  Recommended update adding new functionalities and solutions for some issues:
  
  • Visual Confidence Test: A new dynamic visual test pattern and a better alternative for the predictable 'QUALITY C ONTROL' on AAPM TG-18 QC or OIQ test patterns.
  • Easier display detection on 3rd party display controllers
  • New test patterns: TG18-LPH10, LPH50, LPV50, LPV89 (referred by EUREF guideline for mammography displays)
  • Full support for the RaySafe Solo Light sensor

• Version 1.11.04 (February 2012)
  Not a mandatory update, only recommended for following case:
  
  • Extended support for Unfors & Unfors RaySafe sensors
  • Support for remote installation and upgrade through MSI installer

• Version 1.11.03 (December 2011)
  Not a mandatory update, only recommended for following case:
  
  • Fixes short mouse pointer freezing when logging into Windows XP system

• Version 1.11.02 (November 2011)
  Not a mandatory update, only recommended for following case:
  
  • Add wide gamut/sRGB support for MDRC -2124

• Version 1.11.01 (September 2011)
  Not a mandatory update, only recommended for following cases:
  
  • Support for old MFGD-3220 D monitors
  • Inproved calibration for MDRC-1119 monitors
  • If currently QAWeb Agent background service stops (because of long computer ID)

• Version 1.11 (August 2011)
  Recommended update adding new functionality, support for new Barco Healthcare displays and display controllers and some issues were solved
  
  • Added support for: MDMG-5221, MDCG-10130, MDCG-5121, MDCC-4130, MDNC-2121, MDSC-2124 (Generic), MVGD-1318 (Generic)
  • Improved DisplayPort support
  • Languages added: Spanish and Dutch
  • Possibility to select the sensors to use (and search for)
  • New sensors supported: Wellhofer LXCan through USB, Pehamed Monilux through USB, Minolta CA-210 and Minolta CA-310 through RS232
  • More streamlined service actions through a new service wizard.
  • Support for restoring disk images (and ghosting) with QAWeb Agent pre-installed.

MediCal QAWeb Relay

• Version 1.10 (October 2012) 
  Required update for using QAWeb Agent v1.12.02. Communication improvements and Kerberos proxy compatibility improvement.

• Version 1.09.01 (May 2012)
  Recommended update adding connectivity improvements. This version is now able to upgrade QAWeb Relay versions 1.07 and higher.

• Version 1.08.01 (October 2011)
  Required update only for facilities that experience issues such as ‘unsigned certificate not found for client alias' during Agent registration attempt or messages going through too slowly.

• Version 1.08 (July 2011)
  Required update for QAWeb Agent 1.11.x compatibility and also including improvements for faster message management.

MediCal QAWeb Server

• Version 1.11.02 (April 2013) 
  • Support for new Barco displays.
  • Improved policy management system for Service Providers.
  • Performance improvements
• Version 1.11.01 (December 2012) 
  • Performance improvements.
• Version 1.11 (November 2012) 
  • Performance improvements.
• Version 1.10.01 (May 2012)
  • Browsing and reporting performance improvements.
• Version 1.10 (May 2012)
  • QAWeb Server release in line with new functionalities of QAWeb Agent, also introducing the following new features:
  • Clinical Displays in Reports: Extended reporting for Barco's Clinical Review Displays. Reports include Buget reports, JC (Joint Commission) reports, display reports etc.
  • Visual Confidence Test support
  • Search function to search for workstations, departments, display serial numbers and users
• Version 1.09.02 (October 2011)
  • QAWeb Server release to be in line with the new QAWeb Agent v1.11.01 and QAWeb Relay v1.08.01.
• Version 1.09.01 (September 2011)
  • Fixed some browsing performance issues
• Version 1.09 (July 2011)
  • New release with some major improvements:
  • Support for restoring disk images (and ghosting) with QAWeb Agent pre-installed.
  • Improvements for faster message management.
  • Streamlined the issue solving mechanism.
  • Remote install & update: Replaced old mechanisms with central deployment and silent installation documentation.