| Resolution |
XGA (1024 x 768px) |
| Absolute resolution |
19 dpi |
| Brightness |
145 (@120W) / 160 (@132W) / 215 (@180W) cd/m² |
| Luminous flux |
875 @ 6,500K @ 132W |
| Contrast |
4,800:1 |
| Color |
100% EBU |
| Display technology |
Rear projection DLP |
| White point |
6,500K, natural lighting (special 3,200K option for backdrop) |
| DMD chip |
1024 x 768px
0.7"
±12°tilt
DarkChip3
BrilliantColor™
LVDS
MTBF:650,000 hours
Lifetime: 100,000 hours |
| Image retention |
No image retention or burn-in |
| Pixel accuracy |
PixelTrue display, shows each pixel true to the input pixels without scaling or smoothing effects |
| Screen gap |
mullion: 0 mm
interscreen gap: < 0.2 mm by patented stitch concept
< 1.5 mm for optimal modular screen
@ 25°C, 50% RH |
| Light source |
• Lamp redundancy: cold standby or hot standby with redundant power supply
• Automatic lamps witch by autosensing lamp failure
• Lamp replacement: defect lamp can be hot-swapped without image loss
• Lamp switch: dynamic feedback of brightness and color readjust video wall to equal performance
• Lamp switching time: < 1.5 seconds
• I-lamp: intelligent lamp carries a.o. lamp life information & spectrum |
| Light source lifetime |
120W: 10,000 hours
132W: 6,000 hours
180W: 6,000 hours
(lamp manufacturer specs @ IEC 61947-1 test conditions) |
| Color wheel |
Color wheel cartridge with MTTR < 5 minutes
3x speed for better image representation
Air bearing with rating of 50,000 hours |
| AC power |
100-240 VAC, 60-50Hz |
| Power |
| (W) |
|
Cold standby |
|
Hot standby |
| 120W |
|
< 250 |
|
< 390 |
| 132W |
|
< 275 |
|
< 430 |
| 180W |
|
< 335 |
|
< 550 | |
| Heat dissipation |
| (BTU/h) |
|
Cold standby |
|
Hot standby |
| 120W |
|
< 850 |
|
< 1,325 |
| 132W |
|
< 900 |
|
< 1,375 |
| 180 W |
|
< 1,145 |
|
< 1,875 |
|
| Input/Output |
1 x DVI-D in/out, 1 x Dual-link DVI-D in/out |
| Pixel clock |
162 MHz | 270 MHz (On second input) |
| Input frequency |
Multi sync 30Hz-75Hz |
| Genlock |
49 – 61 Hz |
| Supported resolutions |
VGA, SVGA, XGA, SXGA, SXGA+, UXGA, 1080p, dual XGA, triple XGA*, quad XGA*, dual SXGA+*
*On second input |
| Cropping |
Yes |
| Scaling |
Up- and down scaling (optional) |
| Barco Wall Control Manager |
Graphical representation of video wall on operator PC
Integrates separate video wall modules into a single display, allowing a.o. Sense6
Client – server architecture provides central video wall logic with multiple access from multiple sites
Health Status in the blink of an eye and support for trouble shooting
Configuration of different settings
Wall control by the operator
Multiple access levels |
| Direct ethernet access |
Projection module settings and control through standard ethernet browser.
Easy and fast firmware upgrading over ethernet |
| Autodiagnostics |
Projector self test |
| Integration to third party equipment |
External video wall control from different devices through SOAP based API |
| Dimensions |
• Diagonal: 70" nominal
• Width: 1,400 mm / 55.1".
• Heigth: 1,050 mm / 41.3"
• Depth 763 mm / 30"
• Full Depth: D2 899 mm / 35.4"
• Aspect ratio: 4:3
• Standard height 875 - 1000 - 1200 mm / 34.5" - 39.4" - 47.2"
• Screen height (min) 640 mm, 550 mm upon request / 25.2", 21.7" upon request
• Weight: 101.5 kg / 224 lbs |
