| Display |
- Active area: 22.5" (57cm) diagonal
- Resolution: 1920x1200
- Contrast: typical 800:1 (min 700:1)
- Panel drive: 96-120Hz, 10 bit native, 12 bit dithered
|
| Optical |
- Wide gamut LED backlight
- Selectable white points: D55 – D65 –
D93 [Factory: D65]
- Selectable gamma 2-2.6
[Factory: 2.35 –EBU/SMPTE compliant]
- Custom R, G and B primaries
|
| Calibration and stability |
- Compliant with EBU, SMPTE and ITU
BT.709 primaries
- Deep level, 3D LUT factory calibration
- Thermal sensor circuit for LED stabilization
with temperature
- Embedded spectrometer for overall
color stabilization over time
- Embedded special sensors for LED uniformity
and color stability over time
- Front sensor for real-time corrections
|
| Processing |
- 48 bit color processing (16 bit per color)
- 96-120 Hz native LCD driving (prevents motion judder, genlocks to all inputs)
- Genlock and frame sync
- Slow or fast sync selection
- Color-stabilized scanning LED backlights for motion blur prevention
- Motion adaptive de-interlacing
- Interlaced driving (black-line insertion) for CRT-like motion quality
- Quantified latency (depending on scanning mode)
|
| Connectivity |
- Modular input configuration: 4 slots
- Standard delivered with 1 SDI module
-
Space for additional:
- 1 x SDI module
- 2 x DVI input modules
|
| SDI module specifications |
- Input/output card supporting 2x SDSDI
or 2x HD-SDI
- 3Gb/s and Dual Link inputs
|
| Supported signal standards |
- SD-SDI 576i/480i (ITU-R BT.601)
- HD-SDI 1080p/pSf at 30, 29.97, 25,
24 and 23.98 frame rate (SMPTE
274M)
- HD-SDI 1080i at 60, 59.94 and 50 Hz
field rate (SMPTE 274M)
- HD-SDI 720p at 60, 59.94, 50, 30,
29.97, 25, 24 and 23.98 frame rate
(SMPTE 296M)
- 3Gb/s and Dual Link HD-SDI (SMPTE
372M, 425M)
|
| Functions |
- Safe area and aspect ratio markers
- User selection of working color space
(color temperature, gamma, gamut)
- R-G-B-monochrome channel selection
- Extended aspect ratio and scaling factor
selection
- Split-screen mode with zooming and
panning per displayed input (for multiple
camera color correction)
- In-Monitor-Display (IMD) and 2 inmonitor
tally lights controlled
remotely (optional)
|
| Control |
- Detachable front control panel with
main functions
- Ethernet interface with web server
and TCP/IP interface
- RS485 serial IMD control (optional)
- RS485 parallel GPIO for tally control
(optional)
- USB: for firmware and license upload
via mass-storage devices
|
| Power and environmental specifications |
- Power consumption: nominal 150W
- Input voltage: 85-264 VAC, 47-63 Hz
|
| Dimensions |
| Dimensions |
Front |
Rear |
Total |
| Width (W) |
561mm | 22.09in |
441mm | 17.36in |
561mm | 22.09in |
| Height (H) |
381mm | 15in |
375mm | 14.76in |
381 + 44mm | 15in + 1.73in |
| Depth (D) |
84mm | 3.3in |
56mm | 2.20in |
140mm | 5.51in |
| Weight |
20,5kg | 45.1lbs |
|
|
| Rackmount kit available | |
