| Resolution |
SXGA+ (1400 x 1050px) |
| Absolute resolution |
25.4 dpi |
| Luminous flux |
1000 @ 6500K @ 132W |
| Contrast |
5100:1 |
| Color |
100% EBU |
| White point |
6500K, natural lighting (special 3200K option for backdrop) |
| DMD chip |
1400 x 1050px
0.95"
±12°tilt
DarkChip3
BrilliantColor™
LVDS
MTBF:650,000 hours
Lifetime: 100,000 hours |
| Image retention |
No image retention or burn-in |
| Pixel accuracy |
PixelTrue display, shows each pixel true to the input pixels without scaling or smoothing effects |
| Lamp |
| • Lamp life (lamp manufacturer specs @ IEC 61947-1 test conditions): |
| |
- 120 W: 10,000 hours |
| |
- 132 W: 6,000 hours
- 180 W: 6,000 hours |
• Lamp redundancy: cold standby or hot standby with redundant power supply
• Automatic lamp switch by autosensing lamp failure |
| • Lamp replacement: defect lamp can be hot-swapped without image loss |
| • Lamp switch: dynamic feedback of brightness and color readjust video wall to equal performance |
| • Lamp switching time: < 1.5 seconds |
| • I-lamp: intelligent lamp carries a.o. lamp life information & spectrum | |
| Color Wheel |
Color wheel cartridge with MTTR < 5 minutes
3x speed for better image representation
Air bearing with rating of 50,000 hours |
| AC power |
100-240 VAC, 60-50Hz |
| Power |
| (W) |
|
Cold standby |
|
Hot standby |
| 120W |
|
< 250 |
|
< 390 |
| 132W |
|
< 275 |
|
< 430 |
| 180W |
|
< 335 |
|
< 550 |
|
| Heat dissipation |
| (BTU/h) |
|
Cold standby |
|
Hot standby |
| 120W |
|
< 850 |
|
< 1325 |
| 132W |
|
< 900 |
|
< 1375 |
| 180W |
|
< 1145 |
|
< 1875 |
|
| Input/Output |
1 x DVI-D in/out, 1 x Dual-link DVI-D in/out |
| Pixel clock |
162 MHz | 270 MHz (On second input) |
| Input frequency |
Multi sync 30Hz-75Hz |
| Genlock |
49 – 61 Hz |
| Supported resolutions |
VGA, SVGA, XGA, SXGA, SXGA+, UXGA, 1080p, dual XGA, triple XGA*, quad XGA*, dual SXGA+*
*On second input |
| Cropping |
Yes |
| Scaling |
Up- and down scaling (optional) |
| Barco Wall Control Manager |
Graphical representation of video wall on operator PC
Integrates separate video wall modules into a single display, allowing a.o. Sense6
Client – server architecture provides central video wall logic with multiple access from multiple sites
Health Status in the blink of an eye and support for trouble shooting
Configuration of different settings
Wall control by the operator
Multiple access levels |
| Direct ethernet access |
Projection module settings and control through standard ethernet browser.
Easy and fast firmware upgrading over ethernet |
| Autodiagnostics |
Projector self test |
| Integration to third party equipment |
External video wall control from different devices through SOAP based API |
| Dimensions |
Diagonal: 70" nominal
Width: 1400 mm / 55.1 in.
Heigth: 1050 mm / 41.3 in.
Depth: 763 mm / 30 in.
Full Depth: D2 689.5 mm / 27.15 in.
Aspect ratio: 4:3
Standard height 836 mm / 32.9 in, 1288 mm / 50.7 in.
Screen height (min) 613 mm / 24.1 in.
Weight/module 150kg / 330.7 lbs |
