DMP-100

External Input
DVI-I up to UXGA (1600x1200)

Internal Input
DVI for backup image/video from embedded PC

Scaler
Automated scaler, utilizes Athena scaler, also used in Barco high-end video processing DX-700 and
LEDPro

Single Output
Proprietary Barco LED Wall interface via DVI-I connector

Output Resolution
1,024 x 768 @ 50Hz

Initial Calibration and Setup
RMS-1 provides integrated control for initial calibration of tiles and setup of DMP-100 parameters.

Calibration
Barco auto calibration function, possible from remote

Operation
Remotely via IP network

Position
Automatic alignment

Health monitor
Run time, temperature, fan state, video signal

Intelligent Brightness Control
Based on (multiple) external light sensor, GPS location and orientation

Brightness Control Failsafe
At no occasion LED display brightness will exceed maximum values, prevents blinding at low environmental light conditions

Monitoring
24/7 integrated monitoring of Video processor and LED display

Automated Failure Alert
E-mail notification

Remote Access
Full remote access (over IP) to monitoring PC, Video processor, LED display, health parameters and other settings from any location WW

Camera
Camera support for live view (optional)

Control port
1 RS-232 port (DB-9), 1 Ethernet (RJ-45) and 2 USB port

HDD
1Gb RAM, 4Gb SSD

Operating system (OS)
Windows XP embedded operation system

With screws (mm)
240 x 262.4 x 56 (W x D x H)

With mounting bracket (mm)
266 x 262.4 x 56 (W x D x H)

Weight
2.8Kg

Operation temperature
0°C - 45°C

Power consumption
50W

Input voltage range
100V - 240V 50Hz

Certification
ETL, CE, FCC Class A