DX-700

Multi-window, versatile image processing unit for LED displays

Similar products
- DX-700
- LED-PRO
- DMP-100
- DV-100

Application areas

Inputs	1 x Analog input (HD-15) All resolutions supported to a maximum rate of 240MHz (progressive or interlaced scan). 10-bits/color sampling 1 x 3-BNC input All resolutions supported to a maximum rate of 240MHz (progressive or interlaced scan). 10-bits/color sampling Supports composite NTSC/PAL/Secam, S-Video (Y/C) and Component RGB or YPbPr w/Sync-on-G (Y) Supports Tri-level sync 1 x DVI Digital input All resolutions supported to a maximum rate of 165MHz (single-link) or 240MHz (dual-link). Supports both RGB and YCbCr, progressive or interlaced. Supports single-link and dual-link Also used as Expansion Input port when linking units together 2 x HD/SD SDI input 525/60 (NTSC) and 625/50 (PAL), per SMPTE 259M HD 720p per SMPTE 296M, HD 1080i per SMPTE 292M Supports single-link and dual-link Dual-link HD-SDI modes supported per SMPTE 372M: 1080p, 4:2:2 YCbCr, 10-bit up to 60Hz 1080i or 1080p/PsF up to 30Hz with: 10-bit 4:4:4 RGB or YCbCr 12-bit 4:4:4 RGB or YCbCr 12-bit 4:2:2 YCbCr
Outputs	Triple DVI-style connectors supporting the Barco Legacy 32MHz LED Output protocol. Each output can drive a different type of Barco LED product. Large displays can be driven by combining multiple outputs. 2 output cards (6 outputs) are required to output 2K x 1080 to 1080 x 2K. Triple HDMI-style connectors supporting the Barco high-resolution NNI LED output protocol. Large displays can be driven by combining multiple outputs. The 2K x 1080 to 1080 x 2K output resolution can be achieved by combining the 3 outputs on a single NNI Output Module.
User Control	Front Panel Display VGA touch panel Display, Display setup wizard, Source setup wizard, Preset management menu, Source alignment menu, Display management, DX-700 management Front Panel Buttons Six softkeys are used to access menus and activate functions. Five navigation buttons are used to navigate through menus and lists. Black button. This button places black on all outputs. Test pattern button. This button takes you directly to the Test Pattern Generator Menu. Presets button. This button takes you directly to the Preset Management Menu. Remote Control Fully controllable over IP
Base unit	Width: 19" Rack Height: 5RU Input/Output Connectors All Input and Output connectors are located on the back. The connections with the system module are located on the back. RJ-45 connector for communication with DTS. Analog (HD-15) and Digital (DVI-I) monitor output connector are located on the back. DMX IN and DMX THROUGH connectors. DIAGNOSTIC RS232 connector (for system diagnostics only) Power 100-240 VAC, 50-60 Hz, Auto selecting