| General specifications |
- Capacity: 64 audio channels input capability
- Hot-swap features:
- 4 slots of 16 channels (8 stereo pairs) each
- All cards hot-swappable
- Input card types automatically recognized
- Accuracy: Level processing performed at 16 bit resolution
- Monitoring: 1 slot for analog and AES/EBU monitor outputs
- Serviceability: All firmware is stored in field programmable FLASH memory
- Supported audio scales:
- NORDIC (IEC 60268-10 Type I)
- DIN PPM (IEC 60268-10 Type I)
- BBC PPM (IEC 60268-10 Type II)
- VU (IEC 60268-17)
- VU EXT (IEC 60268-17)
- DIGITAL (IEC 60268-18)
|
|---|
| Analog input cards |
- Type: Analog with +24dB capability
- Capacity: 16 mono input channels (8 stereo pairs) per card
- Alarms: Alarm detection for audio loss, over level and out-of-phase on adjacent pairs
- Input type: Differential
- Input impedance: 40k Ohms
- Input sensitivity: 0dBu
- Input connector: DB25 female
- Maximum input level: +24dBu
- Frequency response at -3dB points: from 1Hz. to 20.2kHz
- Frequency response at –0.5dB points: from 5Hz to 20kHz
- A/D converte: Stereo 24 bit converter
- Sampling frequency: 48kHz per channel
- Accuracy: +/- 0.1dB @ 1kHz 0dB reading
|
|---|
| Digital input cards |
- Type: AES/EBU (balanced/unbalanced selected by jumpers on the PCB)
- Capacity: 8 AES/EBU pairs per card
- Alarms: Alarm detection for audio loss, over level, out-of-phase on adjacent pairs and carrier loss detection
- Input type: Differential 110 Ohm or Single-ended 75 Ohm
- Input compatibility: RS422
- Input connector: DB25 female
- Input interface: Transformerless
- Sampling frequency: 32, 44.1, 48kHz detected via input
- Accuracy: +/- 0.1dB @ 1kHz 0dB reading
|
|---|
| Physical |
- Dimensions overall:
height: 44.5 mm | 1.75 in (1U)
width: 483 mm | 19 in
depth: 367 mm | 14.45 in
- Weight: 7 kg | 14 lbs.
- Power mains: 100-240V, 60Hz/50Hz
- Power consumption: 60 W
- Operating conditions: 0 - 40 °C | 32 - 104 °F at max. 90% relative humidity, non condensing
|
|---|
