OverView fDR+70-DL

70" dual lamp front access video wall system integrating DLP™ technology with SXGA+ resolution.

This product is no longer available.
Please consult Barco's current product offering.

ResolutionSXGA+ (1400 x 1050px)
DMD chip1400 x 1050px
0.95"
±12° tilt
LVDS
MTBF:650,000 hours
Lifetime: 100,000 hours
Number of used micromirrors1.47 M
PixelshapeSquare
Aspect Ratio4:3
Lamp
• Lamp life (lamp manufacturer specs @ IEC 61947-1 test conditions):
  - 100 W: 2 x 10000 hours
  - 120 W: 2 x 6000 hours
• Lamp modes: hot stand-by and cold stand-by
• Lamp switching times:
  - After lamp switch: 0,5 seconds
  - After lamp failure: 1,5 seconds
• Hot Standby-image reaches 50% brightness after lamp switch in less then 0.5 seconds
AC power100-240 VAC, 60-50Hz
Power
    Cold standby   Hot standby
100 W   190 W   285 W
120 W   210 W   325 W
Heat dissipation
    Cold standby   Hot standby
100 W   650 BTU/h   975 BTU/h
120 W   715 BTU/h   1110 BTU/h
Brightness100W:700 ANSI Lumen
120W: 800 ANSI Lumen
Contrast1600:1
Brightness uniformity90%
Automated lamp alignment after lamp change for optimized color uniformity and brightness
Active patent pending mechanism for brightness tolerancing reduction
DimmingOptical Dimming with Dynamic Feedback
Brightness locking: 50-100% optical dimming range, without color shift, loss of contrast and loss of colordepth
Image equalization: All display modules can be set to equal brightness and contrast
ColorEBU color triangle
White point: 6500K, but can be set to other values
InputsStandard: Dual DVI-D
Optional: OverView D Multi input module: DVI-D, DVI-I, Multi Sync RGB input (VGA upto UXGA), Video Input (PAL, NTSC, SECAM)
Genlock48 – 62 Hz
Dimensions structureDiagonal: 70" nominal
Width: 1400 mm / 55.1 in.
Height 1050 mm / 41.3 in.
Depth: 780 mm / 30.7 in.
Socket Heigth: 1288 mm / 50.7 in.
Socket Heigth: (min) 613 mm / 24.1 in.

Share

|

More information