OverView cDG80-DL

80" dual lamp video wall system integrating DLP™ technology with XGA resolution.

This product is no longer available.
Please consult Barco's current product offering.

ResolutionXGA (1024 x 768px)
DMD chip1024 x 768px
0.7"
±12° tilt
DDR
MTBF:650,000 hours
Lifetime: 100,000 hours
Number of used micromirrors0.79 M
PixelshapeSquare
Aspect Ratio4:3
Lamp
• Lamp life (lamp manufacturer specs @ IEC 61947-1 test conditions):
  - 100 W: 2 x 10000 hours
  - 120 W: 2 x 6000 hours
• Lamp modes: Hot stand-by, cold stand-by and Auto Switch mode
• Lamp switching times:
  - After lamp switch: 0,5 seconds
  - After lamp failure: 1,5 seconds
• Hot Standby-image reaches 50% brightness after lamp switch in less then 0.5 seconds
AC power100-240 VAC, 60-50Hz
Power
    Cold standby   Hot standby
100 W   190 W   285 W
120 W   210 W   325 W
Heat dissipation
    Cold standby   Hot standby
100 W   650 BTU/h   975 BTU/h
120 W   715 BTU/h   1110 BTU/h
Brightness100W: 550 ANSI Lumen
120W: 675 ANSI Lumen
Contrast1300:1
Brightness uniformity90%
Automated lamp alignment after lamp change for optimized color uniformity and brightness
Active patent pending mechanism for brightness tolerancing reduction
DimmingOptical Dimming with Dynamic Feedback
Brightness locking: 50-100% optical dimming range, without color shift, loss of contrast and loss of colordepth
Image equalization: All display modules can be set to equal brightness and contrast
ColorEBU color triangle
White point: 
- 100W: 6500 K
- 120W: 3200 K/6500 K
- 200W: 3200 K/6500 K
Inputs

Standard: Dual DVI-D
Optional:
- DVI-D in/out with support for dual XGA input timing 1024x1536
- OverView D Multi input module: DVI-D, DVI-I, Multi Sync RGB input (VGA upto UXGA), Video Input (PAL, NTSC, SECAM)

Genlock48 – 62 Hz
Dimensions structureDiagonal: 80" nominal
Width: 1600 mm / 63 in.
Height 1200 mm / 47.2 in.
Footprint 965 mm / 38.0 in.
Depth: 1098 mm / 43.2 in.
Socket Heigth: 1288 mm / 50.7 in.
Socket Heigth: (min) 537 mm / 21.1 in.

Share

|

More information