| Resolution |
SXGA 1280 x 1024 TruePixel |
| Absolute resolution |
23 dpi |
| Luminous flux |
875 @ 6500K @ 132W |
| Contrast |
5100:1 |
| Color |
100% EBU |
| White point |
6500 K, natural lighting (special 3200 K option for backdrop) |
| DMD chip |
1280 x 1024 pixels
0.95"
±12° tilt
DarkChip3
BrilliantColor™
LVDS
MTBF: 650,000 hours
Lifetime: 100,000 hours |
| Image retention |
No image retention or burn-in |
| Pixel accuracy |
PixelTrue display, shows each pixel true to the input
pixels without scaling or smoothing effects |
| Lamp |
| • Lamp life (lamp manufacturer specs @ IEC 61947-1 test conditions): |
| |
- 120 W: 10,000 hours |
| |
- 132 W: 6,000 hours
- 180 W: 6,000 hours |
• Lamp redundancy: cold standby or hot standby with redundant power supply
• Automatic lamp switch by autosensing lamp failure |
| • Lamp replacement: defect lamp can be hot-swapped without image loss |
| • Lamp switch: dynamic feedback of brightness and color readjust video wall to equal performance |
| • Lamp switching time: < 1.5 seconds |
| • I-lamp: intelligent lamp carries o.a. lamp life information & spectrum | |
| Color wheel |
Color wheel cartridge with MTTR < 5 minutes
3x speed for better image representation
Air bearing with rating of 50,000 hours |
| AC power |
100-240 VAC, 60-50Hz |
| Power |
| (W) |
|
Cold standby |
|
Hot standby |
| 120W |
|
< 250 |
|
< 390 |
| 132W |
|
< 275 |
|
< 430 |
| 180W |
|
< 335 |
|
< 550 |
|
| Heat dissipation |
| (BTU/h) |
|
Cold standby |
|
Hot standby |
| 120W |
|
< 850 |
|
< 1325 |
| 132W |
|
< 900 |
|
< 1375 |
| 180W |
|
< 1145 |
|
< 1875 |
|
| Input/Output |
1 x DVI-D in/out, 1 x Dual-link DVI-D in/out
|
| Pixel clock |
162 MHz | 270 MHz (On second input)
|
| Input frequency |
Multi sync 30Hz-75Hz |
| Genlock |
Yes
Freq.range: 49-61 Hz |
| Supported resolutions |
VGA, SVGA, XGA, SXGA, SXGA+, UXGA, 1080p, dual XGA, triple XGA*, quad XGA*, dual SXGA+*
*On second input |
| Cropping |
Yes |
| Scaling |
Up- and down scaling (optional) |
| Barco Wall Control Manager |
• Graphical representation of video wall on operator PC
• Integrates separate projection modules into a single display, allowing a.o. Sense6
• Client – server architecture provides central video wall logic with multiple access from multiple sites
• Health status in the blink of an eye and support for trouble shooting
• Configuration of different settings
• Wall control by the operator
• Multiple access levels
|
| Direct ethernet access |
• Projection module settings and control through standard ethernet browser.
• Easy and fast firmware upgrading over ethernet |
| Autodiagnostics |
Projector self test |
| Integration to third party equipment |
External video wall control from different devices through SOAP based API |
| Dimensions |
• Width 1400 mm / 55.1 in.
• Heigth 1120 mm / 44.1 in.
• Diagonal 70" nominal
• Depth 837.5 mm / 34.4 in.
• Full depth D2 973 mm / 38.3 in.
• Aspect ratio 5:4
• Standard height 875 - 1000 - 1200 mm / 34.5 - 39.4 - 47.2 in.
• Screen height (min) 640 mm, 550 mm upon request / 25.2 in., 21.7 in. upon request
• Weight 108.5 kg / 239 lbs |
