ClickShare CSE-200 base unit firmware v1.3.0.29

v1.3.0.29

342.62 MB

29 jul '16

ClickShare CSE-200

Release notes

===New feature / Improvements===

  • Support for Buttons without certificate (article number R9861006D01). Pairing Buttons between CSE-200 and CSM-1/CSC-1 requires the latest firmware versions on these devices (01.06.01.0004/01.09.02.0003).
  • A web UI wizard is added for easy and quick configuration of the Base Unit.
  • Support for Google Cast.
  • Reworked security page to make clear which features are enabled/disabled in which security level.


===Fixes===
  • When showing presentations full screen on MAC, it may be that the previous slide is displayed or that sharing does not start.
  • When in network integration mode, the corporate access point should have 6Mbps datarate enabled for the Button to connect.


===Remarks===
  • When updating from 01.02.01.0001 to this release, the Base Unit will not have a fixed IP after the automatic reboot. You will need to manually reboot again or update via version 01.02.02.003.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.4 and higher.
  • This release supports the mirrorOp app version 2.0.4 and higher.



Important notice for updating to software version 01.02 or above

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.


v1.2.2.3

===Fixes===

  • Button connection failure when name contains non-ascii characters.
  • Audio distortion over HDMI if resolution higher than fullHD.
  • Base unit only accessible via same subnet when using static IP.


===Remarks===
  • Buttons without certificate (article number R9861006D01) are not supported yet.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.4 and higher.
  • This release supports the mirrorOp app version 2.0.4 and higher.



Important notice for updating to software version 01.02

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.


v1.2.1.1

===New Features/Improvements===

  • Fixed a problem on device bootup
  • Pin code support for mobile apps and airplay.
  • Support for corporate network integration
  • RESTAPI
  • Web interface change: Control interface page and sharing protocols page are now combined in services page.
  • Stability improvements.
  • Security improvements.
  • Localisation improvements.


===Fixes===
  • Static IP setting doesn't always work.
  • Base Units will always identify with hostname "clickshare" on network.
  • Sometimes the log files are not downloaded. It will show an empty zip file instead of a tar.gz file with content. In that case the downloading needs to be done again.
  • It can take some time (more than 1 minute) before the Button can connect to the Base Unit. It happens more in cases when there was a disconnection between Base Unit and Button.
  • Security fix: CVE-2015-7547.


===Remarks===
  • Buttons without certificate (article number R9861006D01) are not supported yet.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.4 and higher.
  • This release supports the mirrorOp app version 2.0.4 and higher.



Important notice for updating to software version 01.02

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.


v1.2.0.1

===New Features/Improvements===

  • Pin code support for mobile apps and airplay.
  • Support for corporate network integration
  • RESTAPI
  • Web interface change: Control interface page and sharing protocols page are now combined in services page.
  • Stability improvements.
  • Security improvements.
  • Localisation improvements.


===Fixes===
  • Static IP setting doesn't always work.
  • Base Units will always identify with hostname "clickshare" on network.
  • Sometimes the log files are not downloaded. It will show an empty zip file instead of a tar.gz file with content. In that case the downloading needs to be done again.
  • It can take some time (more than 1 minute) before the Button can connect to the Base Unit. It happens more in cases when there was a disconnection between Base Unit and Button.
  • Security fix: CVE-2015-7547.


===Remarks===
  • Buttons without certificate (article number R9861006D01) are not supported yet.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.4 and higher.
  • This release supports the mirrorOp app version 2.0.4 and higher.



Important notice for updating to software version 01.02

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.


v1.1.0.8

===Changes===

  • Airplay support.


===Fixes===
  • The sharing issues when the wallpaper is disabled and audio output is set to HDMI are fixed.
  • Fix for: When starting to share, audio is not always immediately available. When this happens a user cannot stop sharing as long as the audio is not available.
  • Display resolution list is now correct when using HDMI to DVI adaptor.
  • On certain Client or Base Unit resolutions the mouse pointer was not correctly positioned.
  • The mouse cursor displayed by the Base Unit is now always matching the one of the laptop.
  • There are less transition artifacts when going from one user to two users on screen and vice versa.
  • Proxy settings are working now.
  • Improved MAC client stability.
  • When standby and screensaver time out are set identically the screen will not constantly switch on and off anymore.
  • Some laptops have problems using extended desktop mode. e.g. not being able to switch back to primary screen.


===Remarks===
  • Buttons without certificate (article number R9861006D01) are not supported yet.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.4 and higher.
  • This release supports the mirrorOp app version 2.0.4 and higher.


Version history

Version details Security Size Release date
v1.8.1.2 Authentifizierung erforderlich 369.3 MB 02 aug '19 Direct download
v1.8.0.6 Authentifizierung erforderlich 369.29 MB 26 jul '19 Direct download
v1.7.1.1 Authentifizierung erforderlich 375.53 MB 13 may '19 Direct download
v1.7.0.22 Authentifizierung erforderlich 368.31 MB 28 mar '19 Direct download
v1.6.1.2 Authentifizierung erforderlich 363.74 MB 14 sep '18 Direct download
v1.6.0.3 Authentifizierung erforderlich 359.33 MB 29 jun '18 Direct download
v1.5.2.3 Authentifizierung erforderlich 355.84 MB 27 mar '18 Direct download
v1.5.1.2 Authentifizierung erforderlich 362.74 MB 27 dec '17 Direct download
v1.5.0.12 Authentifizierung erforderlich 363.35 MB 14 dec '17 Direct download
v1.4.2.12 Authentifizierung erforderlich 363.6 MB 13 sep '17 Direct download
v1.4.0.105 Authentifizierung erforderlich 361.64 MB 23 jun '17 Direct download
v1.3.4.8 Authentifizierung erforderlich 360.5 MB 04 apr '17 Direct download
v1.3.1.5 Authentifizierung erforderlich 344.39 MB 26 sep '16 Direct download
v1.3.0.29 (selected) Authentifizierung erforderlich 342.62 MB 29 jul '16 Direct download
v1.2.2.3 Authentifizierung erforderlich 365.43 MB 19 may '16 Direct download
v1.2.1.1 Authentifizierung erforderlich 386.26 MB 02 may '16 Direct download
v1.2.0.1 Authentifizierung erforderlich 364.77 MB 08 apr '16 Direct download
v1.1.0.8 Authentifizierung erforderlich 383.13 MB 18 feb '16 Direct download

Telefon- und E-Mail-support

Unsere Hotline bietet Ihnen sofortigen Support am Telefon. Ein Team erfahrener Supportmitarbeiter steht Ihnen für professionelle Hilfe zur Verfügung.

Wählen Sie Land & Markt