ClickShare CSE-200 base unit firmware v1.6.1.2

v1.6.1.2

363.74 MB

14 sep '18

ClickShare CSE-200

Release notes

=== What's new in this release ===

  • Support for extension pack version 01.01 and higher.


=== Things we fixed ===

  • Issue where Button does not always connect to the closest access point in full network integration mode
  • Security fixes: CVE-2018-5390, CVE-2018-5391, CVE-2017-8890, CVE-2018-10943
  • Issue with EAP when using special characters in the password
  • Changing resolution over REST API needs to be done differently than described in the manual
  • API changing resolution doesn't work
  • Cosmetic typo in WebUI French
  • Wrong translation in Norwegian
  • Base Unit reboots at random moments in time
  • Airplay in stand-alone mode visible but not sharable
  • Airplay in CNI visible but not sharable



v1.6.0.3

=== What's new in this release ===

  • Touchback

    Enable more interactive meetings with our new Touchback feature! When connecting a touch screen to your Base Unit, it is now possible to interact with the presenter. computer with touch. No need to install drivers, search for the USB cables or work with a dedicated room system: bring your own device, plug in a Button and discover a whole new level of collaboration.

    Note: Touchback feature only works on the CSE-200 Base Units when used with Buttons with serial number R9861500D01 or R9861500D01C, and only when one presenter is on screen. For immediate use of the feature, make sure to pair the Buttons after updating. No configuration is needed on the Base Unit. List of supported touch screens can be found in the technical documentation section of the product page.

  • Support for the Button Manager

    ClickShare now makes it easier for IT or facility managers or venue hosts to pair a number of ClickShare Buttons to a Base Unit in a particular meeting room without actually requiring physical access to the room or Base Unit. More information about the Button Manager can be found here: www.barco.com/product/clickshare-button-manager

  • Other

    The ClickShare client is now signed with a new certificate.

    'Capture More' mode is now used by default for screen scraping. This will only impact Windows 7 users.


=== Things we fixed ===

  • Issue where Button does not always connect to the closest access point in full network integration mode
  • Issue with EAP when using special characters in the password
  • Issue where a 'ClickShare server Error' was given on the CSE-200
  • Sending dummy string to port 7100 results in Base Unit crash (CVE-2018-10943)



v1.5.2.3

=== What's new in this release ===

  • Update privacy policy and EULA.


=== Things we fixed ===
  • "intense use, change to another WiFi channel" in Web UI + 5GHZ doesn't work anymore.
  • Web UI showed "Failing systems: ClickShare server".
  • Wireless SSID still shown on dashboard page in corporate network integrated mode.
  • Windows ClickShare Client remains running in the background up to 2 minutes after removing the Button.
  • Youtube in Firefox not captured in full screen.
  • Extended desktop and primary monitor words are not the same in Japanese.
  • ClickShare client stopped working after start up.



v1.5.1.2

=== Remark ===

  • To be able to use the mobile devices in Corporate Network mode, after updating to v1.5, the user needs to check "Enable over LAN". Please refer to https://www.barco.com/en/support/knowledge-base/KB5281


=== Things we fixed ===
  • When upgrading a CS-100 or CSE-200 Base Unit to 1.05.00 and network connected, in a non /24 network, the base unit will not have the correct subnet mask (as DHCP client) resulting in the Base Unit not being reachable - by CMGS or ClickShare Configurator. This results in the base units’ web UI not being reachable anymore and the buttons not being able to reach the base unit in Corporate Network Integration. Updating will require one to have a device in the same subnet as the Base Unit or update through a USB thumb drive.
  • When upgrading from 01.05.00 to a higher version the base unit may not accept the update (workaround: enable Allow firmware downgrade and the update will continue)


v1.5.0.12

=== Remark ===
When upgrading CSE-200 to 1.05 and network connected, in a non /24 network, the base unit will not have the correct subnet mask (as DHCP client) resulting in the Base Unit not being reachable. This results in the base units’ web UI not being reachable anymore and the buttons not being able to reach the base unit in Corporate Network Integration. The team is working on a 1.5.1 release which will include a fix for this problem. Updating will require one to have a device in the same subnet as the Base Unit or update through a USB thumb drive.

=== What's new in this release ===

  • Start your meeting quicker
    The time before a Button is ready to share when plugged into a personal computer has been drastically reduced with 30%. That's a lot more time to share brilliant ideas or work on bright outcomes.
  • Perform during your meeting
    Enjoy real end-to-end 30 frames per second with audio and video in perfect harmony. Our adaptive algorithm makes sure you can stun your audience during your meeting.
  • Plug and update
    Download the update for your Base Unit from the Barco website. Extract the zip file and put it on a USB stick without re- naming. Plug the USB into your Base Unit and enjoy the newest release. Of course, you can also update your fleet using the auto-update functionality or the Collaboration Management Suite. This is only applicable after updating to 1.5.
  • Auto-discovery
    Adding your Base Unit to the Collaboration Management Suite has never been easier. Now all our CSE-range Base Units support auto discovery when plugged into the network and running the Collaboration Management Suite centrally.
  • Mixed mode
    Sharing through mobile devices has never been easier. You can now enjoy sharing over the wire while the Buttons still connect to the Base Unit directly. Hence without configuring network integration. To do so, simply browse to the Services page on the ClickShare Configurator WebUI and select "Enable over LAN".


=== Things we fixed ===
  • (Alpha)numeric passcode
    • We now use the standard passcode support included in the Airplay protocol. But it left us no choice then to drop the alphanumeric passcode, which is officially not supported. Hence security level 2 now uses numeric passcodes by default.
  • And a lot more
    • Added the ability to retrieve the MAC address of the Button via the ClickShare Configurator webUI
    • Fixed an issue where the ClickShare Button Client crashed on macOS
    • Fixed an issue where an update would fail until reboot
    • Fixed an issue where the auto-update server could not be reached if the Base Unit had a manual IP configuration
    • Fixed an issue where the IP address of the Ethernet interface was not displayed on screen
    • Fixed an issue where the Button sometimes was unable to connect to the Base Unit.
    • Fixed an issue where the notifications on Windows or macOS were wrongly displayed because of a long meeting room name
    • The following CVE's have been fixed with respect to the Krack Attack vulnerability
      CVE-2017-13077: Reinstallation of the pairwise encryption key (PTK-TK) in the 4-way handshake.
      CVE-2017-13078: Reinstallation of the group key (GTK) in the 4-way handshake.
      CVE-2017-13079: Reinstallation of the integrity group key (IGTK) in the 4-way handshake.
      CVE-2017-13080: Reinstallation of the group key (GTK) in the group key handshake.
      CVE-2017-13081: Reinstallation of the integrity group key (IGTK) in the group key handshake.



v1.4.2.12

===New feature / Improvements===

  • Security fixes
  • Support for updated component


===Remarks===
  • After installing software version 01.04.02 or above, it is not possible anymore to downgrade to a version prior to 01.04.02.



v1.4.0.105

===New feature / Improvements===

  • Supports Extension Pack for Extended Desktop.
  • Quicker Button connection time.
  • Improved auto-update.
  • Security improvements.
  • Channel usage indication.


===Remarks===
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.



v1.3.4.8

===New feature / Improvements===

  • Button connection issues resolved in environments with high interference (e.g. motion detector).
  • Drastic reduction in connection time between the Button and Base unit in network integrated setup.
  • When recovering from standby mode the ClickShare will automatically become responsive.
  • When ClickShare screensaver is on, the Barco logo is animated.


===Remarks===
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.



v1.3.1.5

===New feature / Improvements===

  • Support for Mac OSX Sierra 10.12.
  • Support for Buttons without certificate (article number R9861006D01). Pairing Buttons between CSE-200 and CSM-1/CSC-1 requires the latest firmware versions on these devices (01.06.01.0004/01.09.02.0003).


===Remarks===
  • When updating from 01.02.01.0001 to this release, the Base Unit will not have a fixed IP after the automatic reboot. You will need to manually reboot again or update via version 01.02.02.003.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.2 and higher.
  • This release supports the mirrorOp app version 2.0.2 and higher.



Important notice for updating to software version 01.02 or above

After installing CS-100 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.


v1.3.0.29

===New feature / Improvements===

  • Support for Buttons without certificate (article number R9861006D01). Pairing Buttons between CSE-200 and CSM-1/CSC-1 requires the latest firmware versions on these devices (01.06.01.0004/01.09.02.0003).
  • A web UI wizard is added for easy and quick configuration of the Base Unit.
  • Support for Google Cast.
  • Reworked security page to make clear which features are enabled/disabled in which security level.


===Fixes===
  • When showing presentations full screen on MAC, it may be that the previous slide is displayed or that sharing does not start.
  • When in network integration mode, the corporate access point should have 6Mbps datarate enabled for the Button to connect.


===Remarks===
  • When updating from 01.02.01.0001 to this release, the Base Unit will not have a fixed IP after the automatic reboot. You will need to manually reboot again or update via version 01.02.02.003.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.4 and higher.
  • This release supports the mirrorOp app version 2.0.4 and higher.



Important notice for updating to software version 01.02 or above

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.


v1.2.2.3

===Fixes===

  • Button connection failure when name contains non-ascii characters.
  • Audio distortion over HDMI if resolution higher than fullHD.
  • Base unit only accessible via same subnet when using static IP.


===Remarks===
  • Buttons without certificate (article number R9861006D01) are not supported yet.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.4 and higher.
  • This release supports the mirrorOp app version 2.0.4 and higher.



Important notice for updating to software version 01.02

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.


v1.2.1.1

===New Features/Improvements===

  • Fixed a problem on device bootup
  • Pin code support for mobile apps and airplay.
  • Support for corporate network integration
  • RESTAPI
  • Web interface change: Control interface page and sharing protocols page are now combined in services page.
  • Stability improvements.
  • Security improvements.
  • Localisation improvements.


===Fixes===
  • Static IP setting doesn't always work.
  • Base Units will always identify with hostname "clickshare" on network.
  • Sometimes the log files are not downloaded. It will show an empty zip file instead of a tar.gz file with content. In that case the downloading needs to be done again.
  • It can take some time (more than 1 minute) before the Button can connect to the Base Unit. It happens more in cases when there was a disconnection between Base Unit and Button.
  • Security fix: CVE-2015-7547.


===Remarks===
  • Buttons without certificate (article number R9861006D01) are not supported yet.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.4 and higher.
  • This release supports the mirrorOp app version 2.0.4 and higher.



Important notice for updating to software version 01.02

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.


v1.2.0.1

===New Features/Improvements===

  • Pin code support for mobile apps and airplay.
  • Support for corporate network integration
  • RESTAPI
  • Web interface change: Control interface page and sharing protocols page are now combined in services page.
  • Stability improvements.
  • Security improvements.
  • Localisation improvements.


===Fixes===
  • Static IP setting doesn't always work.
  • Base Units will always identify with hostname "clickshare" on network.
  • Sometimes the log files are not downloaded. It will show an empty zip file instead of a tar.gz file with content. In that case the downloading needs to be done again.
  • It can take some time (more than 1 minute) before the Button can connect to the Base Unit. It happens more in cases when there was a disconnection between Base Unit and Button.
  • Security fix: CVE-2015-7547.


===Remarks===
  • Buttons without certificate (article number R9861006D01) are not supported yet.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.4 and higher.
  • This release supports the mirrorOp app version 2.0.4 and higher.



Important notice for updating to software version 01.02

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.


v1.1.0.8

===Changes===

  • Airplay support.


===Fixes===
  • The sharing issues when the wallpaper is disabled and audio output is set to HDMI are fixed.
  • Fix for: When starting to share, audio is not always immediately available. When this happens a user cannot stop sharing as long as the audio is not available.
  • Display resolution list is now correct when using HDMI to DVI adaptor.
  • On certain Client or Base Unit resolutions the mouse pointer was not correctly positioned.
  • The mouse cursor displayed by the Base Unit is now always matching the one of the laptop.
  • There are less transition artifacts when going from one user to two users on screen and vice versa.
  • Proxy settings are working now.
  • Improved MAC client stability.
  • When standby and screensaver time out are set identically the screen will not constantly switch on and off anymore.
  • Some laptops have problems using extended desktop mode. e.g. not being able to switch back to primary screen.


===Remarks===
  • Buttons without certificate (article number R9861006D01) are not supported yet.
  • The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
  • This release supports the ClickShare app version 2.0.4 and higher.
  • This release supports the mirrorOp app version 2.0.4 and higher.


Version history

Version details Security Size Release date
v1.8.1.2 Authentifizierung erforderlich 369.3 MB 02 aug '19 Direct download
v1.8.0.6 Authentifizierung erforderlich 369.29 MB 26 jul '19 Direct download
v1.7.1.1 Authentifizierung erforderlich 375.53 MB 13 may '19 Direct download
v1.7.0.22 Authentifizierung erforderlich 368.31 MB 28 mar '19 Direct download
v1.6.1.2 (selected) Authentifizierung erforderlich 363.74 MB 14 sep '18 Direct download
v1.6.0.3 Authentifizierung erforderlich 359.33 MB 29 jun '18 Direct download
v1.5.2.3 Authentifizierung erforderlich 355.84 MB 27 mar '18 Direct download
v1.5.1.2 Authentifizierung erforderlich 362.74 MB 27 dec '17 Direct download
v1.5.0.12 Authentifizierung erforderlich 363.35 MB 14 dec '17 Direct download
v1.4.2.12 Authentifizierung erforderlich 363.6 MB 13 sep '17 Direct download
v1.4.0.105 Authentifizierung erforderlich 361.64 MB 23 jun '17 Direct download
v1.3.4.8 Authentifizierung erforderlich 360.5 MB 04 apr '17 Direct download
v1.3.1.5 Authentifizierung erforderlich 344.39 MB 26 sep '16 Direct download
v1.3.0.29 Authentifizierung erforderlich 342.62 MB 29 jul '16 Direct download
v1.2.2.3 Authentifizierung erforderlich 365.43 MB 19 may '16 Direct download
v1.2.1.1 Authentifizierung erforderlich 386.26 MB 02 may '16 Direct download
v1.2.0.1 Authentifizierung erforderlich 364.77 MB 08 apr '16 Direct download
v1.1.0.8 Authentifizierung erforderlich 383.13 MB 18 feb '16 Direct download

Telefon- und E-Mail-support

Unsere Hotline bietet Ihnen sofortigen Support am Telefon. Ein Team erfahrener Supportmitarbeiter steht Ihnen für professionelle Hilfe zur Verfügung.

Wählen Sie Land & Markt