There are two ways to reset the base unit to default settings:
With the webinterface:
- Log in to the ClickShare web interface
- Click the Maintenance tab (1) and then click Configuration (2).
- Click on Load Default Settings to return to the factory defaults (3).
With the reset button:
- Start up the Base unit.
- When Barco logo appears, press the reset button (bottom side of the Base unit) Press this button until the Barco logo disappears and the LEDs are blinking red/white for at least 10 seconds.
- Release the button.
The Base unit will restart with its default configuration
|Restoring to factory defaults will require a repairing of the Buttons used with this Base Unit.|
Last updated Sep 28 2017