How to carry out a factory reset on CSC-1

Article number: [2942] - Legacy code: [5073]

Applicable to

The Base Unit can be reset to its default factory settings in two ways:

  1. Using web interface
  2. Using external keyboard
Warning! Restoring to factory defaults will require re-pairing of the Buttons used with that Base Unit (how to: see KB 5924).

A. Using web interface:

  1. Log in to the web interface of your Base Unit.
  2. Click the Maintenance tab (1) and then click Configuration (2).



  3.  Click on Load Default Settings to return to the factory defaults (3).

 

B. Using external keyboard:

  1. With the Base Unit switched off, connect a USB keyboard to a USB port at the backside the Base Unit.
  2. Power up the Base Unit. The boot menu (GRUB) will open.
  3. Use the down arrow key to select Load Default Settings and press ENTER.
  4. The following message is displayed: “This action will remove all settings of the Base Unit and replace them with the default settings. Are you sure you want to continue?”
    Click Yes. The system will start a reboot and the device will be back to default settings.

 

Properties

Last updated Jan 11, 2024