Button LED ring behavior and explanation

Article number: [4022] - Legacy code: [6338]

Applicable to

The LED ring indicates the current status of your ClickShare device.

Info! For information on Base Unit LED ring color behavior, see KB article KB 9320.

 

CX-20/30/50, C-5/10 and CX-50 Gen2

LEDs behaviorExplanation
white ring filling up
green ring
  • Pairing and software update is done. You can now unplug the Button from the Base Unit.
blinking white
  • Buttons is waiting for the Client(=App) to start and connect on the PC
spinning white circle
  • Button is busy (no end time known).
  • Button is trying to establish connection with the Base Unit.
  • ClickShare App is setting up the connection with the Base Unit.
  • Button is waiting for the user to start the ClickShare
    application.
static white
  • ClickShare is ready to start sharing your screen.
static red
  • ClickShare is sharing your screen with the display. See Note .
red blinking
off (no light)
  • Button is not or not properly inserted into the USB port.
  • Button might be defective.
  • USB port or computer might be defective

 :

CS-100(H), CSE-200(+) and CSE-800

LEDs behaviorExplanation
white blinking
static white
  • ClickShare is ready to start sharing your screen.
  • Pairing is done. You can now unplug the Button from the Base Unit.
static red
  • Sharing your screen with the display.
  • Pairing and software update is done. You can now unplug the Button from the Base Unit.
red blinking
off (no light)
  • Button is not or not properly inserted into the USB port.
  • Button might be defective.
  • USB port or computer might be defective

 :

Info! While sharing content, the laptop will not go to standby. Once sharing is stopped, the laptop will again be capable of going to standby.

Info! For troubleshooting information on white light keep flashing on the ClickShare Button, see KB 5469

Properties

Last updated Mar 18, 2024