Aug 19, 2016
Frequently Asked Questions (FAQ) about installing a laser cinema projector: how to get the projector in my booth?
Cinema 2 min read last updated on: Jun 07, 2017
Laser projectors have created a lot of visibility for themselves in the cinema market, since their introduction in the 2014-2015 timeframe. Exhibitors look at RGB laser projectors to serve larger screens, brighter 3D and/or a more premium experience. Laser phosphor projectors are the product of choice when reduced TCO, higher operational efficiency, and hassle-free operations are important.
The industry is clearly choosing laser and it is clear why they select laser projection. As a manufacturer of laser-illuminated cinema projectors, Barco designs its products in line with the market expectations and requirements. And now, the practicalities begin to pop up.
Given the importance of cooling and the impact it has on brightness and lifetime of laser light sources, the projectors have a relatively large(r) cooling component. For Barco’s RGB laser projectors these are called 'chillers': a closed circuit of cooling liquid below ambient, much like a refrigerator. The cooling unit of our laser phosphor units is comparable to a car radiator. In any case, it’s this carefully designed cooling that allows us to reach performance metrics like 30,000 hours lifetime to 80% light level. Of course, the cooling adds to the total volume. Barco’s 60,000-lumen RGB laser projector measures 74 x 144 x 29cm; and has two chillers of 70 x 70 x 80cm each. The projector weighs 235 kg.
These aren’t rocket science, but they’re things that need to be checked in advance. The cooling units of Barco’s projectors (both the chiller of the RGB projector as the radiator for laser phosphor) can be put remotely. This can help you in optimizing your booth layout.
Read the next blog to learn which laser safety instructions you need to take into account.
Integrating a laser projector: what will the impact be on my operations?
In the next three articles we’ll share some of the Frequently Asked Questions (FAQ) we get and their answers.
We start off with: How to get the laser projector into my booth?
Given the importance of cooling and the impact it has on brightness and lifetime of laser light sources, the projectors have a relatively large(r) cooling component. For Barco’s RGB laser projectors these are called 'chillers': a closed circuit of cooling liquid below ambient, much like a refrigerator. The cooling unit of our laser phosphor units is comparable to a car radiator. In any case, it’s this carefully designed cooling that allows us to reach performance metrics like 30,000 hours lifetime to 80% light level. Of course, the cooling adds to the total volume. Barco’s 60,000-lumen RGB laser projector measures 74 x 144 x 29cm; and has two chillers of 70 x 70 x 80cm each. The projector weighs 235 kg. 4 more things to consider when installing a laser projector
Your checklist for the physical installation should include things like:
- Are my doors wide enough?
- Is my lifting equipment strong enough?
- Do I have to climb stairs?
- Is my pedestal strong enough?
These aren’t rocket science, but they’re things that need to be checked in advance. The cooling units of Barco’s projectors (both the chiller of the RGB projector as the radiator for laser phosphor) can be put remotely. This can help you in optimizing your booth layout.
Read the next blog to learn which laser safety instructions you need to take into account.
Related products
Stay in touch
Receive the latest news about our service & products
we will not share your e-mail address with 3rd parties
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.