A.1 Specifications Balder
| Projector type | Single chip DLP |
|---|---|
| Light source lifetime | 20,000 - 60,000 hours Laser intensity dependent |
| CLO (constant light output) | Yes |
| Optical dowser | Yes |
| Technology | 0.9" DMD™ |
| Integrated web server | Yes |
| Resolution | 5,120 x 2,160 (4K UHD) |
| Diagnostics | via Prospector web interface |
| Aspect ratio | 1.78:1 (16:9) |
| Light source | Laser phosphor |
| Light output | DCI (P3) Color Wheel: Up to 4,000 ANSI lumens T Color Wheel: Up to 5,000 ANSI lumens M Color Wheel: Up to 7,000 ANSI lumens |
| Contrast ratio | 1,800:1 Sequential 450:1 ANSI |
| Brightness uniformity | >90% |
| Input resolutions | From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz or up to 2,560 x 1,600 @ 120Hz |
| Lens range | (R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation) (R9801832) - FLDX UST (0.41:1) - 90° Lens (R9802244) - EN67 (0.65:1) (R9802243) - EN66 (0.80 - 1.21:1) (R9802003) - EN76 (0.95 - 1.30:1) (R9802242) - EN63 (1.20 - 1.70:1) * (R9802241) - EN61 (1.70 - 2.50:1) * (R9801211) - EN44 (2.50 - 4.60:1) * Standard Lens Option(s) |
| Latency | TBD |
| Optical lens shift | Up to 88% vertical lens shift & up to 38% horizontal lens shift (depending on lens selection) Visit the Barco Residential Lens Calculator for further information Download Lens & Airflow Data Here |
| Color correction | P7 RealColor™ |
| Standby power | Standby ECO Mode: 110v - 0.73W (with LAN Connection) 230v - 0.82W (with LAN Connection) |
| Color gamut | DCI (P3) Color Wheel: DCI P3 T Color Wheel: REC.709 M Color Wheel: REC.709 |
| Image processing | Embedded Warp & Blend Engine |
| WARP | 4-Corner Warp & Bow Correction via Warp Engine |
| Orientation | 360° Rotation |
| Network connection | 10/100 Ethernet via RJ45 connection |
| Operational humidity | 20 to 80% (relative humidity) |
| HDR | HDR10 |
| 3D | Active Stereoscopic 3D Additional hardware required please contact an authorized Barco representative for details |
| Inputs | 1 x HDMITM 2.0 (HDCP 2.2) 1 x HDBaseT (HDCP 1.4 - 9Gbps only) 2 x Dual Link DVI-D 2 x Display Port (1.2) 12G-SDI 1 x RJ45 Ethernet 1 x RS232 1 x Remote Control (RC) 3 x USB (2 x Rear, 1 x Front) DMX (1 x Input, 1 x Output) |
| Shipping Dimensions | Excluding Lens 730 x 600 x 480 mm 28.7 x 23.7 x 18.9 in. |
| Control | IR, RS232, IP, 12v Trigger Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them. Download our integration guide for more information. |
| Shipping weight | Excluding Lens 43 kg / 94.8 lbs |
| Power requirements | 100 - 240V / 50 - 60Hz |
| Standard accessories | Power Cord, Remote Control |
| Certifications | CE, FCC Class A and cCSAus |
| Power consumption | 1,100 W - Max. |
| Noise level (typical at 25°C/77°F) | 36 dB(A) |
| 24/7 operation | This projector is designed and warranted for heavy duty 24/7 operation. Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications. |
| Operating temperature | 10 to 45 °C at Sea Level Optimal Set Point: 20 °C |
| Operating humidity | 20 to 80% relative humidity |
| * | Firmware upgradable Please contact an authorized Barco representative for details |
| BTU per hour | 4,000 BTU/h - Max. |
| Airflow requirements | Air Inlet (from Rear w/Feet Down): Right Side Exhaust (from Rear w/Feet Down): Rear Clearance Requirements: Front: 1cm Left: 1cm Right: 50cm Rear: 100cm Top: 1cm |
| Exhaust airflow | 112 ft3/min @ 25 °C 190 m3/hour @ 25 °C Download Lens & Airflow Data Here |
| Dimensions (WxLxH) | Excluding Lens 475 x 588 x 286 mm 18.7 x 23.1 x 11.3 in. |
| Weight | Excluding Lens 37 kg / 81.5 lbs |
| Warranty | Limited 3 years parts and labor Extendable up to 5 years |
| Safety requirements | This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 4.7 is installed. For northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.5 is installed. Refer to the installation manual for further information. |