About delayed power down

Working with the same image or an application with static image elements (e.g. toolbars, icons) during almost a full working day continuously may result in a form of image retention. You can avoid or significantly reduce the occurrence of this phenomenon by enabling the delayed power down option.

This option will keep the display’s backlight running for 4 hours after DPMS mode is activated (instead of immediately switching off the backlight upon DPMS activation).

Note: Enabling delayed power down is only effective when the DPMS mode is also enabled. Please refer to “DPMS mode” to do this.

To enable/disable delayed power down on your display:

1. Bring up the OSD main menu.
2. Navigate to the Configuration > Power Management menu.
3. Enter the Delayed Power Down submenu.
4. Select Enabled/Disabled as desired and confirm.