4.26 DisplayPort standard version

About DisplayPort standard version

The Coronis Uniti supports 2 DisplayPort standard versions: DP V1.1 and DP V1.2, the latter providing a higher video bandwidth.

To select the DisplayPort standard version
  1. Bring up the OSD main menu.
  2. Navigate to the Configuration > Image Sources > Input Settings > DisplayPort 1/2 menu.
  3. Enter the Input Interface Standard Version submenu.
  4. Select one of the available versions and confirm.
Note: To obtain full resolution and full refresh rate, DP V1.2 should be selected and two DisplayPort video input cables must be connected to the display.