About grayscale conversion modes

Grayscale conversion modes specify how color generated on the display controller is converted to grayscale in your display.

The available grayscale conversion modes are:

• No Conversion
• Use Red Channel: This mode is intended for grayscale displays where gray is sent over the red channel.
• Use Green Channel: This mode is intended for grayscale displays where gray is sent over the green channel.
• Use Blue Channel: This mode is intended for grayscale displays where gray is sent over the blue channel.

To manually select a grayscale conversion mode:

1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources > Input Settings > DisplayPort1/2 menu.
3. Enter the Grayscale Conversion submenu.
4. Select one of the available color conversion modes and confirm.