5.7.2 Failover input

About failover input

This function allows the display to automatically switch to a failover (backup) source in case the DisplayPort input main source is missing. The display will automatically restore the main source once the signal is back.

The available failover inputs for your display are:

Note: The failover input will be activated within about 1 second after the main input (DisplayPort) has been lost.
Note: During the transition from main to failover input and vice versa, a text message is visible to inform the user.
Note: The main source can be changed while the failover input remains unchanged. During the selection and synchronization of a new main source the failover function is temporary (7 sec) disabled.
To select the failover input
  1. Bring up the OSD main menu.
  2. Navigate to the Input menu.
  3. Select one of the available failover inputs and confirm.