About transfer function

There are different transfer function possibilities:

• Native: the transfer function is transparent (no correction is applied).
• DICOM (Factory): The output curve follows the DICOM transfer function and is automatically adapted to the current brightness.
• Gamma (Factory): The output curve follows the gamma transfer function; the value can be set between 1 and 4. The default value is 2.42.
• User LUT: The monitor output is corrected according to a predefined user LUT. which can be downloaded inside the monitor.

To select the transfer function

1. Bring up the OSD main manu.
2. Navigate to the Transfer menu.
3. Enter the Transfer submenu.
4. Select one of the available functions and confirm.