About wall mounting

No mounting bracket is needed to install the Base Unit on the wall. The Base Unit can be mounted in any position on the wall, but it is preferred to mount it with the connections downwards.

The total weight of the Base Unit is 600 g.

Required tools

• a drill (type of drill depends on the type of wall)
• Screwdriver (depending on the used screws)

Required parts

• 2 mounting screws, maximum head diameter of 6.5 mm
• 2 plugs

How to install

1. Drill two holes in the wall or ceiling as indicated on the drawing.

   Horizontal distance : 162 mm,

   

2. Insert a plug in each hole (if needed, depends on the wall or ceiling type) and drive in 2 screws. Do not drive in the screws completely.

   

   Note: Mounting screws and plugs are not included with the Base Unit. The type of screws and plugs depend on the wall material i.e. stone, wood, plasterboard, ...

   Ensure that the head of the screw is not larger than the hole in the bottom plate of the Base Unit (< 6.5mm).

3. Hook the Base Unit on both screw heads and slide the Base Unit downwards until it is fixed.