About wall mounting

No additional mounting bracket is needed to attach the Base Unit to a wall. The Base Unit can be mounted in any orientation against the wall.

The Base Unit weighs: 900.

Note: Ensure that the surface is clean, dry and not flexible before attaching the Base Unit.

Required tools

• a drill (type of drill depends on the type of wall)
• Screwdriver (depending on the used screws)

Required parts

• 2 mounting screws, maximum head diameter of 6.5mm
• 2 plugs

How to install

1. Drill two holes 162mm horizontally spaced into the wall.
2. Insert a plug into each hole. (optional)

3. Partially insert a screw in each plug or hole.

   

   Note: Mounting screws and plugs are not included with the Base Unit. The type of screws and plugs depend on the wall material i.e. stone, wood, plasterboard, ...

   Ensure that the head of the screw is not larger than the hole in the bottom plate of the Base Unit (< 6.5mm).

4. Hook the Base Unit on both screw heads and slide the Base Unit downwards until it is fixed.