Overview

With the FLEX technology the projector owners can lock the light output to different levels. The locking can be done via 3 different ways:

• Via Projector Toolset when connected via an Ethernet connection with the projector. See Projector Toolset's user guide (R5905073, index 04), chapter ““FLEX, light output control””.
• Via the OSD menu of the projector itself
• Via an SMS message send to a projector equipped with an optional GSM board.

To lock to a specific value a 4 digit code is necessary; These codes can be created by the projector owner using Projector Toolset.