4.1.6 Lens shift, zoom & focus

Via Lens key

  1. Press LENS key on the local keypad or the remote control.

    The zoom/focus menu opens.

    Image 4–23 Zoom/Focus adjustment

  2. Use the ▲ or ▼ key to zoom the lens.

    Use the ◄ or ► key to focus the lens.

    Press ENTER to switch to Lens shift adjustment.

    Image 4–24 Shift adjustment

  3. Use the ▲ or ▼ key to shift the lens in vertical direction.

    Use the ◄ or ► key to shift the lens in horizontal direction.

    Press ENTER to switch to zoom/focus adjustment.

Via direct access keys on the remote control
  1. Press LENS FOCUS button [-] or [+] (C) for an overall focus of the image.
  2. Press ▲ LENS SHIFT ▼ button for correct vertical position of the image on the screen.
  3. Press ◄ LENS SHIFT ► button for correct horizontal position of the image on the screen.
Note: Take into account that the lens focus may slightly drift while the lens is warming up from cold to operation temperature. This is a typical phenomenon for projection lenses used with high brightness projectors. The operation temperature of the lens is reached after approximately 30 minutes projection of average video.