4.3.8 Picture in Picture input

About Picture in Picture input

This function allows the display to show a second input source as an inset window inside the main source.

The possible Picture in Picture combinations between the Primary input (main source) and the Secondary input (PiP image) is displayed in the following table.

Primary inputSecondary input

DP 1.2 MST / 1.1 / Dual

HDMI 2.0–1

HDMI 2.0–2

12G-SDI (on SDI 1, only for MDSC-8427 12G)

  • DVI
  • SDI (only for MDSC-8427 LED)
  • SDI 3 (only for MDSC-8427 12G) (*)
Note: Gamma and Color temperature for the PiP source are always set to Native and 6500 K independently from the Transfer Function applied to the Primary input source.
Note: (*) SDI 3 is only available if the SDI configuration mode is Dual SDI.
To select Picture in Picture input
  1. Bring up the OSD main menu.
  2. Navigate to the Input Select menu.
  3. Enter the PiP Input submenu.
  4. Select one of the available PiP inputs (or NONE) and confirm.