MDSC-8427 - Sharpness - User Guide (HTML)

4.1.8 Sharpness

About sharpness level

This command allows to smoothen or sharpen the image. Following values apply:

< 12: Smoothen image
= 12: Neutral image (default)
> 12: Sharpen image

To adjust the sharpness level

Bring up the OSD main menu.
Navigate to the Picture menu.
Enter the Sharpness submenu.
The command bar Sharpness is highlighted.
Set the sharpness level as desired and confirm.

Note: Sharpness control is not available when DisplayPort mode DP 1.1 dual is selected (see “DisplayPort mode”).