About maximum luminance demo

The maximum luminance demo sets the luminance of the LCD panel to its maximum value for 60 seconds, or until the demo is manually cancelled. The actually measured luminance is shown on-screen.

Note: While activated, the maximum luminance demo disables the display’s uniformity correction and sets the Color Preset to Native White. When the maximum luminance demo is cancelled, the original settings are restored.

To activate the maximum luminance demo

1. Bring up the OSD main menu.
2. Navigate to Enable Service mode.
3. Enter the keycode: 9-0-0-1.
4. Enter the Service menu.
5. Navigate to the Maximum Luminance demo submenu and confirm. The maximum luminance demo is activated.
6. Press the jog dial to manually cancel the maximum luminance demo, or wait for 60 seconds after which the demo is automatically cancelled.