Overview

The UST lens kit is designed with two types of installation accessories in order to fit the different lens shift modules (LSM) on the projectors. This manual contains installation instructions for both types. Please check the projector’s boresight to identify the versions of the lens shift module.

Note: Make sure the projector is turned off before checking the boresight.

Projector identification

Check identification label to confirm projector model series

Type 1 Lens Shift Module (LSM 1)

• the boresight plate is secured with three screws.
• LSM 1 has a lens cable plugged to the circuit board on the top left corner.

Type 2 Lens Shift Module (LSM 2)

• boresight plate is secured with four screws.