GET
Get the video output with a specified ID.
| Responses | |
| 200 | GET successful. |
| 404 | Resource does not exist. |
| Response (application/json): object | ||
| Member | Type | Description |
connected | boolean | Indicates if a screen is currently connected to this output. read-only |
enabled | boolean | Indicates if this output is enabled. Since version: 2.7 |
id | integer | read-only |
modelName | string | Model name of the screen connected to this output. Since version: 2.9 read-only |
position | integer | Determines the position for this output. This value switches the monitors in 'Extended video mode'. Only the CX-50 Gen2 devices support a value different than one. All other device types have a single display output. C-5/C-10/CX-20 and CX-30 Gen2 do support two outputs, but only one can be active at the same time. Example: 1 Since version: 2.10 |
preferredResolution | string | The preferred resolution of the screen connected to this output. Example: 1920x1080 read-only |
resolution | string | The requested resolution for this output. If this parameter is set to 'Auto', the native resolution (see nativeHorizontalResolution and nativeVerticalResolution) of the display will be used. A manual resolution that is listed under SupportedResolutions can be set in the format [hor]x[ver]. Example: Auto |
supportedResolutions | array | Supported resolutions for the screen currently connected to this output. Example: ['Auto', '1280x720', '1920x1080'] read-only |
vendorName | string | Vendor name of the screen connected to this output. Since version: 2.9 read-only |