About
PIP (Picture in Picture) and PBP (Picture By Picture) allows the display of two images from two input sources simultaneously.
7.2 Picture-in-Picture and Picture-By-Picture
PIP/PBP
Select the appropriate PIP/PBP mode, or disable the function:
- Off: Disables the PIP/PBP mode.
- PIP: Display one input source on the main screen and the other input source in an insert window.
- PBP: Dispaly two images of the same size on the screen.
Main source
Select an input source for the main image. The available input sources are HDMI1, HDMI2, and HDBaseT.
Sub source
Select an input source for the second image. The available input sources are HDMI1, HDMI2, and HDBaseT.
Swap source
Swap the main source and sub source.
Sub image size
Change the display size of the sub source in PIP mode.
Sub Position
Sub Position: Adjust the position of the sub image. In the following layout charts, the "P" indicates the main image:
PBP Layout chart:
| PBP Layout | |
PBP, Main Left
| PBP, Main Right
|
PBP, Main Top
| PBP, Main Bottom
|
PIP Layout chart:
| PIP Layout | PIP Size | ||
| Small | Medium | Large | |
| PIP, Bottom Right |  |  |  |
| PIP, Bottom Left |  |  |  |
| PIP, Top Left |  |  |  |
| PIP, Top Right |  |  |  |
PBP/PIP Compatibility Chart:
| PIP/BPB Matrix | HDMI-1 | HDMI-2 | HDBaseT |
| HDMI-1 | — | V | V |
| HDMI-2 | V | — | V |
| HDBaseT | V | V | — |
Sub brightness
Adjust the luminous brightness of the sub image to adapt to different ambient light.
Sub Contrast
Adjust the contrast ratio of the sub image.
Sub Color Space
Select a color space for the sub image.