2.4.4 Tri-combo input card

DisplayPort
Digital display interface developed by the Video Electronics Standards Association (VESA). This interface is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used to transmit audio, USB, and other forms of data.
HDMI
High-Definition Multimedia Interface (HDMI) is a compact audio / video interface for transferring uncompressed video data and compressed / uncompressed digital audio data from an HDMI-compliant device, the source device, to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.
SDI
Serial Digital Interface (SDI) is a serial link standardized by the Society of Motion Picture and Television Engineers (SMPTE). SDI transmits uncompressed digital video over a 75-ohm coaxial cable, typically within studios, and is seen as the most professional video infrastructure equipment.
BNC
バヨネット・ニール・コンセルマン (BNC) は、ツイストロック方式を用いて同軸ケーブルを BNC コネクタに接続する方法です。このツイストロックにより、ケーブルとコネクタが確実に密着し、誤って外れるのを防ぎます。これにより、シリアルデジタルビデオ信号、タイミング信号、またはオーディオ信号の伝送が有効化されます。
Overview

The Tri-combo (gen 2) input card allows up to four independent signals to be active. Which four connectors accept a signal can be configured in the Event Master Toolset. For more information, see TCI モード. When a valid signal is connected, then the nearest indicator light will turn green.

ヒント: デフォルトでは、上位 4 つのコネクタがアクティブになっています。

A mix of different signals can be used to make up the four possible connections:

画像 2–9
1
DisplayPort1.2 connector with indicator LED
2
HDMI2.0 connector with indicator LED
3
SDI1 BNC connector with indicator LED
4
SDI2 BNC connector with indicator LED
5
SDI3 BNC connector with indicator LED
6
SDI4 BNC connector with indicator LED