Encore3 - Tri-combo input card - 使用指南 (HTML)

2.4.4 Tri-combo input card

DisplayPort: Digital display interface developed by the Video Electronics Standards Association (VESA). This interface is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used to transmit audio, USB, and other forms of data.

HDMI: 高畫質多媒體介面 (HDMI) 是一種小型的音訊/視訊界面，用於將未壓縮視訊資料和壓縮/未壓縮數位音訊資料從 HDMI 相容裝置、來源裝置傳輸到相容的電腦顯示器，視訊投影機，數位電視或數位音訊裝置。HDMI是現有類比視訊標準的數位替代品。

SDI: Serial Digital Interface (SDI) is a serial link standardized by the Society of Motion Picture and Television Engineers (SMPTE). SDI transmits uncompressed digital video over a 75-ohm coaxial cable, typically within studios, and is seen as the most professional video infrastructure equipment.

BNC: Bayonet Neill-Concelman (BNC) 是一種連接方法，使用扭鎖設計將多條同軸纜線連到 BNC 連接器上。扭鎖可確保纜線與連接器保持最佳接觸狀態，且不易意外脫落。有助於傳輸序列數位視訊、計時訊號或音訊訊號。

Overview

The Tri-combo (gen 2) input card allows up to four independent signals to be active. Which four connectors accept a signal can be configured in the Event Master Toolset. For more information, see “TCI 模式”. When a valid signal is connected, then the nearest indicator light will turn green.

提示：依預設，前四個連接器為啟用狀態。

A mix of different signals can be used to make up the four possible connections:

DP 1.2 connection, using the DisplayPort connector.
HDMI 2.0 connection, using the HDMI connector.
SD SDI connection, using any of the BNC connectors.
HD SDI connection, using any of the BNC connectors.
3G SDI connection, using any of the BNC connectors.
6G SDI connection, using any of the BNC connectors.
12G SDI (single link) connection, using any of the BNC connectors.
12G SDI (quad link) connection, using all four BNC connectors.

圖片 2–9
1
DisplayPort1.2 connector with indicator LED
2
HDMI2.0 connector with indicator LED
3
SDI1 BNC connector with indicator LED
4
SDI2 BNC connector with indicator LED
5
SDI3 BNC connector with indicator LED
6
SDI4 BNC connector with indicator LED