About maximum luminance demo

The maximum luminance demo sets the luminance of the LCD panel to its maximum value for 60 seconds, or until the demo is manually cancelled. The actual measured luminance is shown on-screen.

Note: While activated, the maximum luminance demo disables the display’s backlight stabilizer and sets the Color Temperature/White Tint to Native White. When the maximum luminance demo is cancelled, the original settings are restored.

To activate the maximum luminance demo

1. Bring up the OSD main menu.
2. Navigate to Service Mode submenu.
3. Enter the keycode: 5-0-4-0 to bring up the service mode menu.
4. Navigate to the Maximum Luminance Demonstration submenu.
5. Select Enabled to activate the maximum luminance demonstration.
6. Select Disabled to manually cancel the maximum luminance demonstration, or wait for 60 seconds after which the demonstration is automatically cancelled.