About DICOM status report

• DICOM Compliance status: Shows if the current DICOM curve is compliant or not.
• Maximum error: Shows the maximum error of the current DICOM curve. This is the deviation compared to a perfect DICOM.
• Luminance: Shows the measured luminance.
• Black luminance: Shows the measured black luminance.
• Time elapsed since latest compliance check: Shows the backlight runtime since last compliance check.

• DICOM Calibration Status

  • Not executed: No other information is visible.
  • Calibration executed: When the calibration is executed, the time elapsed since latest calibration is shown.
• Time elapsed since latest calibration: Shows the backlight runtime since last calibration check.
• DICOM compliance check: Measures the DICOM curve of your display in different steps.
• DICOM calibration: Adds a correction to the current DICOM curve to approach the perfect DICOM curve as well as possible.
• DICOM Error threshold: Sets the error threshold. This is the maximum error allowed before a DICOM calibration is required.
• Ambient Light Compensation: Disables/Enables the ambient light compensation function.
• Reading Room: Selects a reading room.
• Reset DICOM Calibration: Restores the original (factory default) DICOM curve.

To retrieve the DICOM status report

1. Bring up the OSD main menu.
2. Navigate to the Embedded QA menu to make the information visible on the screen.