XDL-4K60

XDL‑4K60

60,000 lumens, 4K, 3-chip DLP RGB laser large venue projector

XDL‑4K60

60,000 lumens, 4K, 3-chip DLP RGB laser large venue projector

  • Stunning experiences thanks to high-brightness 4K images in REC 2020 colors
  • Low total cost of ownership thanks to laser light source and brightness levels
  • Reduced installation time through zero alignment

The XDL-4K60 generates no less than 60,000 lumens brightness with colors that are just extraordinary. For bigger screens, more pixels, more impact. Plus incredible RGB laser performance, signal flexibility up to a comfortable 120 Hz, and no alignment.

Images that speak

Offer visitors crisper, more realistic contrast for greater impact with images of breathtaking depth thanks to their native 4K resolution up to 120Hz. And when you need it, use brightness up to a massive 60K lumens.

Cost-saving design

Want to drive down your cost-per-lumen? A single XDL is the answer.  Their RGB laser light source slash image flicker and lamp-related costs and maintenance (such as lamp replacements). Compared to xenon projectors, the XDLs also consume 40% less power - and you can re-use your existing Barco XLD+ lenses. Truly reliable, expect a lifetime of up to 20,000 hours with minimum downtime. 

Easy to set up and use

Installing one projector is always easier than having to install several. It means less equipment to transport and set up – and fewer possible points of failure. XDL speeds up installation by reducing alignment time. The projectors provide an exceptional lens shift of up to 100% so you can install them anywhere you like. You can also easily match images to your projection surface using on-board real-time warping and blending. 

3D that really stands out

Get the absolute most impact with superb 3D performance based on color separation using twin wavelengths and a more effective use of light. Forget the issue of ghosting – there is none. And project onto white rather than silver screens.


General specifications
Type projector
Native 4K 3-chip DLP digital projector up to 120 Hz
Technologie
1.38" DMD™ x3
Resolutie
4,096 x 2,160
Helderheid

Up to 56,000 center lumens using HC lenses / Up to 60,000 center lumens using HB lenses

59,200 ansi lumen

66,600 ISO lumen

Native contrastverhouding
2,800:1 (typical using HC lenses) / 500:1 ANSI contrast (typical) | 2,000:1 (typical using HB lenses) / 450:1 ANSI contrast (typical)
Primelenzen
HC: 1.13-1.72; 1.35-1.86; 1.46-2.10; 1.65-2.60; 2.00-3.35 / HB : XLD 0.8; 1:0 ; 1.45-1.8; 1.8-2.4; 2.2-3.0; 2.8-5.5; 5.5-8.5
Optische lensverschuiving
Vertical up to +/-100%, depending on lens
Horizontal up to +/- 32%, depending on lens
Motorized zoom and focus with memory
Motorized lens shift with memory
Lichtbron
Direct coupled RGB lasers 6P
Levensduur lichtbron
20,000 hrs* 30,000 hrs**
Kleurcorrectie
P7
Optische dowser
Standard
Oriëntatie
Tilt 45° up and 30° downwards | Rotation – 20 degrees / +90 degrees (=Portrait)
Verzegelde DLP™-kern
Standard
Ingangen
Slot 1 :Dual HDBt; HDMI 2.0 (HDCP 2.2); DP 1.2 (HDCP 1.3); Quad 3G/12G SDI / BarcoLink | Slot 2: Quad DP1.2
Invoerresoluties

From NTSC up to 4K (4,096 x 2,160) 120 Hz

refresh rates:

24hz to 120hz 4K/4KUHD (4096 x 2160/ 3860 x 2160)

Foto-na-foto
Two sources simultaneously
CLU (constante lichtuitvoer)
Standard
ScenergiX
Horizontal and vertical edge blending
Beeldverwerking
Embedded warp & blend engine
Trapeziumcorrectie
Yes
Geïntegreerde webserver
Yes
Softwaretools
Projector Toolset
Controle
XLR wired + IR, RS232, Wifi (opt), GSM (opt)
Netwerkverbinding
10/100 base-T, RJ-45 connection, Wifi (optional)
Afmetingen (B x L x H)
Projector: 744 x 1,445 x 706 mm / 29.3 x 56.9 x 27.8 inches (with feet, no lens) | Two chillers, each with the following dimensions: 701 x 701 x 800 mm / 27.6 x 27.6 x 31.5 inches
Gewicht
Projector: 235kg (~520lb) / Chillers: ~115kg (~250lb) per chiller (two chillers needed)
Lengte koelvloeistofslang
2.5-5-10m (8.2-16.4-32.8ft)
Voedingsvereisten
Projector: 200-240/346-415V 50-60Hz 16A 3W+N+PE (Y connection) / Power cord size range: 4 sq mm to 6 sq mm, 10AWG to 8AWG /Circuit breaker range: 25A to 40A | 200-240V 3W+PE 28A 50-60Hz (/\- connection) / Power cord size: 6 sq mm, 8AWG / Circuit breaker: 40A
Chillers: 230/400V 3W+N+PE 16A, 2.5 sq mm (Y connection) or 208V / 3W+PE (/\- connection) / Max. 16A per phase
Omgevingstemperatuur
10-35°C (95°F) Max. (projector and chillers)
Operationele vochtigheid
5-80% (non condens)
Energieverbruik
Projector @ full laser power: 6.7 kW (2D or Polarization 3D) / 3.6 kW (Barco Laser3D - 6P)
Chillers @ full laser power: 3.0 kW (2D or Polarization 3D) / 2.5 kW (Barco Laser3D - 6P)
3D-systemen
Color3D (Barco Laser3D): Native 6-primary color-3D system. Only requires color filter glasses / Active glasses systems / Polarization recuperation systems
Veiligheidsklasse
Class 1, RG3
Certificeringen
CE; ETL/UL/FCC
*Opmerking
*Less than 20% decrease during a runtime of 20,000 hrs
**Less than 20% decrease during a runtime of 30,000 hrs when:
- ambient temperature <30°C (86°F) max (projector and chillers)
- operational humidity <75% (non condens)

EssentialCare for Entertainment

EssentialCare maintenance contract & supplementary service options

  • 24/7 access to priority support
  • Rely on upfront replacements
  • Enjoy the peace-of-mind
  • Pay only for what you need

U kunt nu alle media, brochures, presentaties, papers en marketingdownloads in ons nieuwe en verbeterde downloadcentrum terugvinden

Bezoek het mediacentrum

Op zoek naar technische documenten of productondersteuning?

Voor technische downloads zoals drivers, firmware, handleidingen, tekeningen & documentatie verwijzen wij u graag door naar onze productondersteuningspagina.

Ga naar productondersteuning