Loki

Общие технические характеристики

Тип проектора

Single chip DLP

Срок службы источника света

20,000 - 60,000 hours
Laser intensity dependent

CLO (постоянная светоотдача)

Yes

Оптический гаситель

Yes

Технологии

0.9" DMD™

Встроенный веб-сервер

Yes

Разрешение

3,840 x 2,160 (4K UHD)

Диагностика

via Prospector web interface

Форматное соотношение

1.78:1 (16:9)

Источник света

Laser phosphor

Светоотдача

DCI (P3) Color Wheel: Up to 5,700 ANSI lumens
T Color Wheel: Up to 8,500 ANSI lumens
M Color Wheel: Up to 12,000 ANSI lumens

Коэффициент контрастности

1,800:1 Sequential
450:1 ANSI

Равномерность яркости

>90%

Входное разрешение

From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

Объективы

(R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)

* Standard Lens Option(s)

Задержка

TBD

Оптический сдвиг объектива

Up to 88% vertical lens shift & up to 38% horizontal lens shift (depending on lens selection)

Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Коррекция цвета

P7 RealColor™

Потребление энергии в режиме ожидания

Standby ECO Mode:
110v - 0.78W (with LAN Connection)
230v - 0.87W (with LAN Connection)

Цветовая гамма

DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709

Обработка изображений

Embedded Warp & Blend Engine

WARP

4-Corner Warp & Bow Correction via Warp Engine

Ориентация

360° Rotation

Подключение к сети

10/100 Ethernet via RJ45 connection

Рабочая влажность

20 to 80% (relative humidity)

HDR

HDR10

3D

Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details

Входы

1 x HDMI 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

Управление

IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.

Транспортировочные размеры (ШxДxВ)

Excluding Lens
720 x 910 x 630 mm
28.4 x 35.8 x 24.8 in.

Транспортный вес

Excluding Lens
55 kg / 121.3 lbs

Требования к питанию

100 - 240V / 50 - 60Hz
US Requires: 20A Service (NEMA 5-20P Plug Type)

Стандартные аксессуары

Power Cord, Remote Control

Сертификаты

CE, FCC Class A and cCSAus

Потребляемая мощность

2180 W - Maximum

Уровень шума (типично при 25°C/77°F)

38 dB(A)

Круглосуточная эксплуатация

This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.

Рабочая температура

10 to 45 °C at Sea Level
Optimal Set Point: 20 °C

*

Firmware upgradable
Please contact an authorized Barco representative for details

БТЕ в час

Max. 6,000 BTU/h

Требования к воздушному потоку

Air Inlet (from Rear w/Feet Down):  Right Side
Exhaust (from Rear w/Feet Down):  Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm

Поток вытяжного воздуха

193 ft³/min @ 25 °C
327 m³/hour @ 25 °C
Download Lens & Airflow Data Here

Габариты (ШxДxВ)

Excluding Lens
577 x 738 x 304 mm
22.7 x 29.1 x 12 in.

Вес

Excluding Lens
44.5 kg / 98.1 lbs

Гарантия

Limited 3 years parts and labor
Extendable up to 5 years

Требования безопасности

This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 3.15 is installed. For Northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.33 is installed. Refer to the installation manual for further information.