Loki CinemaScope
Offering the same UHD enhancements as the Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine.
Loki CinemaScope
Offering the same UHD enhancements as the Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine.
- Theater & Media Room Series
- 5K UHD Resolution (5,120 x 2,160)
- Laser Phosphor
- Up to 7,800 ANSI Lumens
Professional grade optics
CinemaScope
Our unique aspect ratio detection system, automatically crops and scales content to fit the appropriate screen area, ranging from 1.78:1 to 2.39:1.
Manual cropping is also available for custom configurations such as cinemascope subtitle support, where only the top black bar is removed from none 1.78:1 content, preserving the subtitles at the foot of the image.
Laser light source
Outstanding
image quality requires an exceptional light source, which is why Loki
Cinemascope uses our brand-new dual laser
engine.
Alongside
significantly improved image uniformity, lasers last longer than traditional
projector lamps, offer great image quality consistence over their lifetime, are
less fragile and offer near instant on/off performance.
Liquid cooling
Loki Cinemascope has
departed from a pure fan based cooling system, opting instead for a liquid
cooling PID regulation system. This
combined with our simulation grade warp engine allows Balder to operate at any angle
(free rotation), offering new possibilities when it comes to architectural
integration.
Specifications
Download spec sheetGeneral specifications
- Projector type
- Single chip DLP
- Technology
- 0.9" DMD™
- Resolution
- 5,120 x 2,160 (5K UHD)
- Aspect ratio
- 2.37:1 (CinemaScope)
- Light source
- Laser phosphor
- Light source lifetime
- 20,000 - 60,000 hours
Laser intensity dependent
- Light output
- DCI (P3) Color Wheel: Up to 5,100 ANSI lumens
T Color Wheel: Up to 6,500 ANSI lumens
M Color Wheel: Up to 7,800 ANSI lumens
- CLO (constant light output)
- Yes
- Contrast ratio
- 1,800:1 Sequential
450:1 ANSI
- Brightness uniformity
- >90%
- Lens range
- (R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)
* Standard Lens Option(s)
- Optical lens shift
Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection)
Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here
- Optical dowser
- Yes
- Color correction
- P7 RealColor™
- Color gamut
- DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709
- Image processing
- Embedded Warp & Blend Engine
- WARP
- 4-Corner Warp & Bow Correction via Warp Engine
- Orientation
- 360° Rotation
- Network connection
- 10/100 Ethernet via RJ45 connection
- Integrated web server
- Yes
- Diagnostics
- via Prospector web interface
- HDR
- HDR10
- 3D
- Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details
- Inputs
- 1 x HDMI 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)
- Input resolutions
- From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz
- Latency
- TBD
- Control
- IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.
- Power requirements
- 100 - 240V / 50 - 60Hz
US Requires: 20A Service (NEMA 5-20P Plug Type
- Power consumption
- 2180 W - Maximum
- BTU per hour
- Max. 6,000 BTU/h
- Standby power
- Standby ECO Mode:
110v - 0.78W (with LAN Connection)
230v - 0.87W (with LAN Connection)
- Noise level (typical at 25°C/77°F)
- 38 dB(A)
- Operating temperature
- 10 to 45 °C at Sea Level
Optimal Set Point: 20 °C
- Operational humidity
- 20 to 80% (relative humidity)
- Airflow requirements
- Air Inlet (from Rear w/Feet Down): Right Side
Exhaust (from Rear w/Feet Down): Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm
- Exhaust airflow
- 193 ft3/min @ 25 °C
327 m3/hour @ 25 °C
Download Lens & Airflow Data Here
- Dimensions (WxLxH)
- Excluding Lens
577 x 738 x 304 mm
22.7 x 29.1 x 12 in.
- Weight
- Excluding Lens
44.5 kg / 98.1 lbs
- Shipping Dimensions
- Excluding Lens
720 x 910 x 630 mm
28.4 x 35.8 x 24.8 in.
- Shipping weight
- Excluding Lens
55kg / 121.3 lbs
- Storage temperature
- -20 to 60 °C
- Storage humidity
- 10 to 90% (relative humidity)
- Standard accessories
- Power Cord, Remote Control
- 24/7 operation
- This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.
- Certifications
- CE, FCC Class A and cCSAus
- Safety requirements
- This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 3.15 is installed. For Northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.33 is installed. Refer to the installation manual for further information.
- Warranty
- Limited 3 years parts and labor
Extendable up to 5 years
- *
- Firmware upgradable
Please contact an authorized Barco representative for details
You can now find all media, brochures, presentations, whitepapers & marketing downloads in our new & improved download center
Visit Media CenterLooking for technical documents or product support?
For technical downloads such as drivers, firmware, manuals, drawings & documentation we would kindly like to direct you to our product support page.
Go to product support