Loki CinemaScope

Loki CinemaScope

Offering the same UHD enhancements as the Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine.

Loki CinemaScope

Offering the same UHD enhancements as the Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine.

  • Theater & Media Room Series
  • 5K UHD Resolution (5,120 x 2,160)
  • Laser Phosphor  
  • Up to 7,800 ANSI Lumens

Loki CinemaScope's exceptional design allows a cinemascope film to be shown without requiring an anamorphic lens. The projector also provides Barco’s renowned single-step processing (SSPTM) and low latency scaling technologies.
 


Professional grade optics

 
By basing Loki CinemaScope on a proven optical architecture, custom designed aspherical glass elements and enhanced low dispersion glass lenses, image quality is in a class of its own. Contrast is not only increased, but the details within the darkest parts of the image are more visible.

CinemaScope

Our unique aspect ratio detection system, automatically crops and scales content to fit the appropriate screen area, ranging from 1.78:1 to 2.39:1. 

Manual cropping is also available for custom configurations such as cinemascope subtitle support, where only the top black bar is removed from none 1.78:1 content, preserving the subtitles at the foot of the image.

Laser light source

Outstanding image quality requires an exceptional light source, which is why Loki Cinemascope uses our  brand-new dual laser engine.  

Alongside significantly improved image uniformity, lasers last longer than traditional projector lamps, offer great image quality consistence over their lifetime, are less fragile and offer near instant on/off performance.  

Liquid cooling 

Loki Cinemascope has departed from a pure fan based cooling system, opting instead for a liquid cooling PID regulation system.  This combined with our simulation grade warp engine allows Balder to operate at any angle (free rotation), offering new possibilities when it comes to architectural integration.

一般规格
投影机类型
Single chip DLP
技术
0.9" DMD™
分辨率
5,120 x 2,160 (5K UHD)
宽高比
2.37:1 (CinemaScope)
光源
Laser phosphor
光源使用期限
20,000 - 60,000 hours
Laser intensity dependent
光输出
DCI (P3) Color Wheel: Up to 5,100 ANSI lumens
T Color Wheel: Up to 6,500 ANSI lumens
M Color Wheel: Up to 7,800 ANSI lumens
CLO(稳定光输出)
Yes
对比度
1,800:1 Sequential
450:1 ANSI
亮度均匀性
>90%
透镜范围
(R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)

* Standard Lens Option(s)
光学镜片移动

Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection)

Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here
挡光板
Yes
色彩纠正
P7 RealColor™
色阶度
DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709
图像处理
Embedded Warp & Blend Engine
WARP
4-Corner Warp & Bow Correction via Warp Engine
安装角度
360° Rotation
网络连接
10/100 Ethernet via RJ45 connection
集成网络服务器
Yes
诊断
via Prospector web interface
HDR
HDR10
3D
Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details
输入
1 x HDMI 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)
输入分辨率
From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz
延迟
TBD
控制
IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.
电力要求
100 - 240V / 50 - 60Hz
US Requires: 20A Service (NEMA 5-20P Plug Type
功率消耗
2180 W - Maximum
每小时BTU
Max. 6,000 BTU/h
待机功耗
Standby ECO Mode:
110v - 0.78W (with LAN Connection)
230v - 0.87W (with LAN Connection)
噪音级别(典型,25°C/77°F时)
38 dB(A)
工作温度
10 to 45 °C at Sea Level
Optimal Set Point: 20 °C
工作湿度
20 to 80% (relative humidity)
气流要求
Air Inlet (from Rear w/Feet Down):  Right Side
Exhaust (from Rear w/Feet Down):  Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm
排风量
193 ft3/min @ 25 °C
327 m3/hour @ 25 °C
Download Lens & Airflow Data Here
尺寸(宽x长x高)
Excluding Lens
577 x 738 x 304 mm
22.7 x 29.1 x 12 in.
净重
Excluding Lens
44.5 kg / 98.1 lbs
装运尺寸
Excluding Lens
720 x 910 x 630 mm
28.4 x 35.8 x 24.8 in.
毛重
Excluding Lens
55kg / 121.3 lbs
存储温度
-20 to 60 °C
存储湿度
10 to 90% (relative humidity)
标准配件
Power Cord, Remote Control
24/7 operation
This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.
认证
CE, FCC Class A and cCSAus
安全要求
This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 3.15 is installed. For Northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.33 is installed. Refer to the installation manual for further information.
保修期
Limited 3 years parts and labor
Extendable up to 5 years
*
Firmware upgradable
Please contact an authorized Barco representative for details

现在,您可以通过我们优化的新下载中心找到所有媒体、手册、演示、白皮书和营销资料下载。

访问媒体中心

需要寻找技术文档或产品服务支持?

如需下载技术内容,如驱动器、固件、手册、图纸和文档,我们建议您前往产品服务支持页面。

转到产品服务支持