5.5.2 Connecting over LAN

LAN
A Local Area Network (LAN) is a collection of network enabled devices in the same physical site or building. Typically all network devices in the same LAN have the same IP address range.
About LAN connection

A LAN connection will connect the Base Unit to the local network. This connection is required for the ClickShare to work as a room system.

How to connect

  1. Connect an ‘ethernet’ cable from the LAN port (reference 1) on the Base Unit to the local network.

    Image 5–51 For Hub Core
    Image 5–52 For Hub Pro

    The LEDs on the LAN port light up or flicker while data is being transmitted.

  2. Adjust the network settings of the Base Unit using one of the following methods: