MDDC‑2424
diagnostic display built for dental specialists
- 24" diagnostic display for dental imaging
- Front sensor for consistent images
- Automated calibration & QA
- Built-in DIN 6868-157 compliance
- Certified medical device, built for dental clinics
Dental diagnostic reading demands more than a general-purpose monitor can deliver. Reading a panoramic, a cephalometric series, an intraoral study, or a cone beam CT means catching the kind of subtle detail — a hairline root fracture, the earliest shadow of caries, a fine change in bone density — that a generic screen was never built to reveal. MDDC-2424 is designed specifically for that job: a display created so dental specialists and their practices can trust every image they read, in every room, every time.
Confidence in every detail
MDDC-2424 keeps subtle findings visible instead of lost in noise: early caries, periodontal ligament changes, hairline fractures, fine bone structure. The full study is shown in one clear view, without cropping or endless scrolling.
Quality that holds over time
Day-one quality that drifts isn’t diagnostic quality. An integrated front-of-screen sensor and QAWeb-managed calibration keep brightness and contrast stable throughout the display’s working life — predictable year after year, and uniform from one workstation to the next.
Made for the clinic, not the office
A certified medical device with a housing designed to be cleaned between patients, plus the connectivity and mounting flexibility a real dental workflow needs. It fits into clinical routine rather than complicating it.
Every dental specialty covered
MDDC-2424 supports the specialties that depend on precise imaging:
- Endodontics: gingival tissue, cortical and medullary bone, and root-end depth, with accurate grayscale reproduction.
- Prosthodontics: dependable 3D visualisation of edentulous sites for implant planning.
- Orthodontics: panoramic clarity for implants, impacted teeth, TMJ assessment and orthognathic planning.
- Periodontics: sensitivity to detect alveolar bone level changes and osseous defect architecture.
- Oral & maxillofacial surgery: the detail that reconstruction and extraction planning demand on CBCT.
Quality assurance and compliance, built in
QAWeb Enterprise, Barco’s cloud-based QA platform, automates calibration and testing across every workstation — no local server, with audit-ready reporting and enterprise-grade data protection. QAWeb for DIN 6868-157 automates acceptance and consistency testing for both dental room classes the standard defines, with compact reports for straightforward record-keeping.
사양
사양서 다운로드일반 사양
- 스크린 기술
- ADS
- 활성 화면 크기(대각선)
- 24"
- 활성 화면 크기(H x V)
- 518.4 mm x 324 mm
- 종횡비(H:V)
- 16:10
- 해상도
- 2 MP (1920 x 1200 pixels @ 60 Hz)
- 픽셀 피치
- 0.27 mm
- 컬러 이미징
- Yes
- 그레이 이미징
- Yes
- 비트 심도
- 8 bit per R, G, B
- 시야각(H, V)
- 178°
- 색상 보정(sRGB)
- Yes
- 색 영역
- Refer to panel specification
- 전면 센서(FLOS)
- Yes
- 최대 휘도(패널 일반)
- 600 cd/m²
- DICOM 보정 휘도
- 350 cd/m²
- 명암비(일반 패널)
- 1000:1
- 응답 시간((Tr + Tf)/2)(일반)
- 14 ms
- 하우징 컬러
- RAL 9003
- 비디오 입력 신호
- 1x DisplayPort
1x DVI-D
1x DVI-A
1x HDMI
- USB 포트
- 1x USB 2.0 Type-B upstream
2x USB 2.0 Type-A downstream
- 전력 등급
- 12 Vdc, 5A
- 소비전력
- < 28 W
< 0.3 W (hibernate)
< 0.3 W (switched off)
- 스탠드 포함 치수(W x H x D)
- Portrait: 383 x 577.1~629.1 x 201.3 mm
Landscape: 568 x 420.6~530.6 x 201.3 mm
- 스탠드 제외 치수(W x H x D)
- 568 x 383 x 67.3 mm
- 패키지 크기(W x H x D)
- 681 x 512 x 198 mm
- 스탠드가 있는 순중량
- 6.8 kg
- 스탠드가 없는 순중량
- 4.6 kg
- 포장된 상태의 순 중량
- 11.2 kg
- 기울기
- -5° to +22°
- 피벗
- 90°
- 높이 조정 범위
- 110 mm
- 장착 표준
- VESA (100 mm)
- 화면 보호
- All digital images, except digital mammography.
- 인증
- CE 0123 (Medical Device)
Safety specific:
IEC 60601-1:2005 + AMD1:2012+ AMD2:2020
EN 60601-1:2006 + A1:2013 + A12:2014
IEC 62368-1:2018
EN 62368-1:2020 + A11:2020
IEC 60601-1-6:2010 + AMD1:2013 + AMD2:2020
EMC specific:
IEC 60601-1-2:2014 + A1:2020
EN 60601-1-2:2015 + A1:2021
Environmental: EU RoHS, REACH, WEEE, Packaging Directive
- 제공되는 액세서리
- 1x DisplayPort video cable
1x USB cable
1x Printed user guide (in English, other languages can be found on the documentation disc)
1x Documentation disc
1x System sheet
Mains cable
Cable cover
Cable clamp
External power supply
- QA 소프트웨어
- QAWeb Enterprise, QAWeb for DIN
- 보증
- 5 years
- 작동 온도
- 0°C to +40 °C
- 보관 온도
- -20 °C to +60 °C
- 작동 습도
- 20 % to 80 % (non-condensing)
- 보관 습도
- 10% to 80 %
- 최소 작동 압력
- 70 kPa
- 보관 압력
- 50 to 106 kPa
당사의 새롭게 향상된 다운로드 센터에서 모든 미디어, 브로슈어, 프레젠테이션, 백서 및 마케팅 다운로드를 지금 확인할 수 있습니다.
미디어 센터 방문
기술 문서 또는 제품 지원을 찾고 계십니까?
드라이버, 펌웨어, 설명서, 도면 및 문서와 같은 기술적 다운로드에 관한 자세한 내용은 제품 지원 페이지에서 참조하세요.
제품 지원으로 이동