Overview
The Tri-combo (gen 2) input card allows up to four independent signals to be active. Which four connectors accept a signal can be configured in the Event Master Toolset. For more information, see “قائمة التكوين > الضبط > تكوين الإدخال”. When a valid signal is connected, then the nearest indicator light will turn green.
تلميح: بشكل افتراضي، تكون الموصِّلات الأربعة العلوية نشطة.
A mix of different signals can be used to make up the four possible connections:
- DP 1.2 connection, using the DisplayPort connector.
- HDMI 2.0 connection, using the HDMI connector.
- SD SDI connection, using any of the BNC connectors.
- HD SDI connection, using any of the BNC connectors.
- 3G SDI connection, using any of the BNC connectors.
- 6G SDI connection, using any of the BNC connectors.
- 12G SDI (single link) connection, using any of the BNC connectors.
- 12G SDI (quad link) connection, using all four BNC connectors.
- 1
- DisplayPort1.2 connector with indicator LED
- 2
- HDMI2.0 connector with indicator LED
- 3
- SDI1 BNC connector with indicator LED
- 4
- SDI2 BNC connector with indicator LED
- 5
- SDI3 BNC connector with indicator LED
- 6
- SDI4 BNC connector with indicator LED