4.8 Tri-combo input card

DisplayPort
Digital display interface developed by the Video Electronics Standards Association (VESA). This interface is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used to transmit audio, USB, and other forms of data.
HDMI
HDMI(High-Definition Multimedia Interface)는 비압축 비디오 데이터 및 압축/비압축 디지털 오디오 데이터를 HDMI 호환 장치인 소스 장치에서 호환 가능한 컴퓨터 모니터, 비디오 프로젝터, 디지털 텔레비전 또는 디지털 오디오 장치로 전송하기 위한 컴팩트 오디오/비디오 인터페이스입니다. HDMI는 기존 아날로그 비디오 표준을 디지털 방식으로 대체합니다.
SDI
직렬 디지털 인터페이스(SDI)는 미국 영화ㆍ텔레비전 기술자 협회(SMPTE)에서 표준화한 직렬 링크입니다. SDI는 75옴 동축 케이블을 통해 비압축 디지털 영상을 전송합니다.
BNC
Bayonet Neill-Concelman(BNC)은 트위스트 락 디자인을 사용하여 동축 케이블을 BNC 커넥터에 연결하는 방법입니다. 이 트위스트 락은 케이블과 커넥터가 최적으로 접촉할 수 있도록 해주고 실수로 분리하기 어렵습니다. 이 장치는 직렬 디지털 비디오, 타이밍 신호 또는 오디오 신호의 전송을 사용할 수 있게 합니다.
Overview

The Tri-combo (gen 2) input card allows up to four independent signals to be active. Which four connectors accept a signal can be configured in the Event Master Toolset. For more information, see “구성 메뉴 > 조정 > 입력 구성”. When a valid signal is connected, then the nearest indicator light will turn green.

팁: 기본적으로 상단 4개의 커넥터가 활성입니다.

A mix of different signals can be used to make up the four possible connections:

이미지 4–13
1
DisplayPort1.2 connector with indicator LED
2
HDMI2.0 connector with indicator LED
3
SDI1 BNC connector with indicator LED
4
SDI2 BNC connector with indicator LED
5
SDI3 BNC connector with indicator LED
6
SDI4 BNC connector with indicator LED