4.1 On/Off switching

Note: The procedures below consider that DC power is supplied to the display. Please check the status of the power mode LED to verify that your display is supplied with DC power (see “Power status LED ”).
To switch on your display

Press and hold (3-4 seconds) the key until the entire keyboard lights up. Afterwards, release the key again (within 2 seconds) to avoid a keyboard re-lock.

Note: When the keyboard backlight lights up, the power mode LED will turn full green indicating that the display is switching on and the logo will be visible for a few seconds.
To switch off your display
  1. Unlock the keyboard (see “Keyboard locking/unlocking”).
  2. With the keyboard unlocked, press and hold (3-4 seconds) the key until the entire keyboard starts blinking quickly. Afterwards, release the key again (within 2 seconds) to avoid a keyboard re-lock.