Walk in and connect with ClickShare PresentSense

Article number: [2014] - Legacy code: [KB12107]

Este artigo se aplica aos produtos a seguir:

Introduction

Connecting to the meeting room with the ClickShare Desktop App is now just as easy as plugging in a Button.

ClickShare PresentSense™ makes sure you seamlessly connect to the room’s ClickShare Base Unit. As soon as you walk into the room, the ClickShare Desktop App detects the ClickShare Base Unit. You no longer need to search through a list of nearby meeting rooms. With just one click, you are connected to the room and you can start sharing or conferencing right away.

Note

ClickShare PresentSense requires ClickShare Desktop app version 4.15 (or higher) and 4.17 (or higher) to be installed on your Windows and MAC computer respectively.

You will need to allow the ClickShare App to use your devices' microphone before it can start detecting the PresentSense signal. See the Privacy section

Additionally, it requires a ClickShare Present (C-5, C-10) or ClickShare Conference (CX-20, CX-30, CX-50) Base Unit with 2.9 firmware or higher installed.

Note

ClickShare Mobile App: PresentSense feature available from version 3.5 and above. If enabled, allows connecting the meeting room automatically.

For the PresentSense feature to be work, make sure that your mobile devices are connected to the same network as the ClickShare Base Unit.

How it works

The ClickShare Base Unit in the meeting room sends out an ultrasound signal, that is picked up by the ClickShare Desktop App through your devices' microphone. Because of the characteristics of sound, that signal will only be available within the meeting room, ensuring you're in the room when the App picks up the signal.

As soon as the App detects the PresentSense signal, it pops up to ask you if you want to connect to the meeting room.

By simply clicking 'Connect' the ClickShare Desktop App will set up the connection to the Base Unit, without any additional steps.

See it in action in this video:

Privacy

Because ClickShare PresentSense uses your devices' microphone to detect the ultrasound signal and we respect your privacy, you will need to allow the ClickShare Desktop App to use the microphone before it can start detecting the PresentSense signal.

You can allow this in the Settings tab of the About window, by sliding the ClickShare PresentSense toggle to the right. You can open the About window via the App menu.  

Of course, you can revoke this permission at any time by sliding the toggle to the left. This will ensure the ClickShare Desktop App no longer uses your microphone, but will also disable the PresentSense functionality.

Whenever the microphone is in use by ClickShare PresentSense, this is clearly visible in the Windows system tray. By hovering over the microphone icon, you can see which app is using the microphone.

Note

When ClickShare PresentSense hasn't been enabled yet in the App and you share content to a meeting room that is sending out the PresentSense signal, the App will ask you to allow it to use your microphone to enable PresentSense as soon as you stop sharing.

More details in our Product privacy statement

Security

Because the PresentSense ultrasound signal doesn't travel through walls, unlike Wi-fi or Bluetooth, the device running the App must physically be in the room in order for it to detect the signal. This is why even when a pincode is enabled on the Base Unit to connect, the App will not ask for that pincode when connecting through PresentSense.

However, to make sure no one walks into the room prior to a meeting and would use the popup to connect once outside of the room if no action is taken on the popup for within 5 seconds, the App will ask for the pincode again.

Note

You may be asked to type in the pincode when multiple people walk in and connect at the same time. 

Propriedades

Última atualização em Jun 14 2022

Essa informação foi útil?