DVI
- DVI cables (connected to the (DVI-I output) should be limited to 5m and only high quality DVI cables used.
- The CSC Base Unit supports DVI single link, but both dual link and single link DVI cables are supported mechanically.
VGA
- VGA cables should be limited to 10m and connected to the DVI-I output using the DVI to VGA converter.
DP
- DP cables (connected to the DP++ output) should be limited to 15m for all resolutions up to 1080p 60Hz.
- For all resolutions higher than 1080p 60Hz cables should be limited to 2m.
- Only DP certified cables should be used.
HDMI™
- HDMI cables (connected to the DP++ output via a passive HDMI converter should be limited to 5m, and only high-quality HDMI 2.0 4K should be used (HDMI 2.0 certified to have a bandwidth of 18 Gigabits per second which supports 4K resolution at 60 FPS (frames per second). HDMI 2.0a – HDMI 2.0a for all previous enhancements with different types of HDR.)
Please note that active cables without external power supply are not supported on any video output.
