How to share content using ClickShare Button

商品编号: [2898] - 遗留代码: [6374]

适用于

To share content using a ClickShare Button you should follow the steps below:

Note: If you're looking for information sharing content using the ClickShare Desktop App (how-to, see KB2607).

Plug in the Button into your laptop's (Windows or macOS) USB port:
- C-/CX-/CB-series: The white ring on the Button is filling up.
  
  In the meanwhile, a Preparing the meeting room... window is displayed on your laptop.
- CS(E)-series/CSC-1/CSM-1: The Button start flashing white.
When the Button changes to static white, it's ready to share content.
Click the Button.
- C-/CX-series, CS(E)-series and CSC-1/CSM-1: Button LED changes to a static red and your screen are shared.
- CB-series: Button LED changes to a static purple and your screen is shared. Button LED changes to a static purple-red, if remote participants and screen are shared.

Note:

Before disconnecting the ClickShare Button from your laptop, always stop sharing your screen on the meeting room display. If you remove the Button without unsharing, your shared content may remain frozen on the meeting room display for a few seconds, during which the screen will be unresponsive until the Base Unit detects the disconnection.
For detailed information on using the ClickShare Button with your Base Unit, see the chapter Basic Use, with Button in your ClickShare Base Unit user guide. The user guide can be downloaded from here (how to: see KB9362).

Video tutorial

See it in action in the video below "How can you share with a ClickShare Button".

For issues with the Button, such as the LED not lighting up or flashing white continuously, please see KB4349 for the troubleshooting tips.
For any other issues, please contact Barco Support by raising a Service Ticket (how-to, see KB6024).

找不到解决方案？