Précédent
Balder
A divine force, bringing beauty and life to the most refined home cinema and media rooms.
- Theater & Media Room Series
- 4K UHD Resolution (3,840 x 2,160)
- Laser Phosphor
- Up to 7,000 ANSI Lumens
Liste de prix:
(hors TVA, droits de douane et de transport)
Prix non disponible
R9023464
Balder
Manufactured to perfection in Belgium, Balder is built from the highest quality materials including aluminium, magnesium and glass. Balder not only shares the same Ultra HD and HDR compatible Pulse electronics as Loki, the optical design and single laser engine are also taken from the Loki platform.
Professional grade optics
By basing Balder’s optical engine on it’s bigger brother Loki’s architecture, which features custom designed aspherical glass elements and enhanced low dispersion glass lenses, image quality is in a class of its own.
Topping that, Balder’s chassis and core are built from aluminium and magnesium, which offer exceptional robustness, resulting in the best picture quality ever shown at this level.
State of the art electronics
Our “Pulse” electronics are built on a superior FPGA platform, featuring a dual core processor on the industry’s only 20 nm SoChave, with 96 transceiver lanes delivering 3.3 Tbps of serial bandwidth.
Thanks to our unique single step processing technology (SSPTM), Pulse electronics are designed to process 4K UHD, HDMITM 2.0a, HDCP 2.2 and HDR10 signals with extremely low latency. This provides exceptional gaming and movie viewing experiences.
Laser light source
Outstanding image quality requires an exceptional light source, which is why Balder uses our brand-new laser engine which delivers up to 7,000 ANSI lumens output.
Alongside significantly improved image uniformity, lasers last longer than traditional projector lamps, offer great image quality consistence over their lifetime, are less fragile and offer near instant on/off performance.
Liquid cooling
Balder has departed from a pure fan based cooling system, opting instead for a liquid cooling PID regulation system. This combined with our simulation grade warp engine allows Balder to operate at any angle (free rotation), offering new possibilities when it comes to architectural integration.
Spécifications
Télécharger la notice techniqueSpécifications générales
- Type de projecteur
- Single chip DLP
- Durée de vie de la source lumineuse
- 20,000 - 60,000 hours
Laser intensity dependent
- CLO (rendement lumineux constant)
- Yes
- Coupe-flux optique
- Yes
- Technologie
- 0.9" DMD™
- Serveur Web intégré
- Yes
- Résolution
- 5,120 x 2,160 (4K UHD)
- Diagnostic
- via Prospector web interface
- Rapport d'aspect
- 1.78:1 (16:9)
- Source de lumière
- Laser phosphor
- Luminosité
- DCI (P3) Color Wheel: Up to 4,000 ANSI lumens
T Color Wheel: Up to 5,000 ANSI lumens
M Color Wheel: Up to 7,000 ANSI lumens
- Rapport de contraste
- 1,800:1 Sequential
450:1 ANSI
- Uniformité de la luminosité
- >90%
- Résolutions d'entrée
- From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz
- Gamme de lentilles
- (R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)
* Standard Lens Option(s)
- Latence
- TBD
- Décalage de lentille optique
Up to 88% vertical lens shift & up to 38% horizontal lens shift (depending on lens selection)
Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here
- Correction de couleur
- P7 RealColor™
- Alimentation veille
- Standby ECO Mode:
110v - 0.73W (with LAN Connection)
230v - 0.82W (with LAN Connection)
- Espace colorimétrique
- DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709
- Traitement des images
- Embedded Warp & Blend Engine
- WARP
- 4-Corner Warp & Bow Correction via Warp Engine
- Orientation
- 360° Rotation
- Connexion réseau
- 10/100 Ethernet via RJ45 connection
- Humidité de fonctionnementle
- 20 to 80% (relative humidity)
- HDR
- HDR10
- 3D
- Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details
- Entrées
- 1 x HDMITM 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)
- Dimensions de l'envoi
- Excluding Lens
730 x 600 x 480 mm
28.7 x 23.7 x 18.9 in.
- Contrôle
- IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.
- Poids d'expédition
- Excluding Lens
43 kg / 94.8 lbs
- Consommation d'énergie requise
- 100 - 240V / 50 - 60Hz
- Accessoires standards
- Power Cord, Remote Control
- Certifications
- CE, FCC Class A and cCSAus
- Consommation électrique
- 1,100 W - Max.
- Niveau sonore (typique à 25 °C)
- 36 dB(A)
- Fonctionnement 24h/7j
- This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.
- Température de fonctionnement
- 10 to 45 °C at Sea Level
Optimal Set Point: 20 °C
- Humidité opérationnelle
- 20 to 80% relative humidity
- *
- Firmware upgradable
Please contact an authorized Barco representative for details
- BTU par heure
- 4,000 BTU/h - Max.
- Exigences en matière de débit d'air
- Air Inlet (from Rear w/Feet Down): Right Side
Exhaust (from Rear w/Feet Down): Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm
- Débit d'air d'échappement
- 112 ft3/min @ 25 °C
190 m3/hour @ 25 °C
Download Lens & Airflow Data Here
- Dimensions (P x L x H)
- Excluding Lens
475 x 588 x 286 mm
18.7 x 23.1 x 11.3 in.
- Poids
- Excluding Lens
37 kg / 81.5 lbs
- Garantie
- Limited 3 years parts and labor
Extendable up to 5 years
- Exigences de sécurité
- This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 4.7 is installed. For northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.5 is installed.
Refer to the installation manual for further information.
lentilles
FLD+ 2.5 – 4.6 (EN44)
FLD+ 2.5 – 4.6 (EN44)
2,33 – 4,3 : 1 (WUXGA) / 2,5 – 4,6 (WQXGA) pour F70 et F90 3,51 – 6,45 : 1 (WQXGA et 4K UHD) pour F80 (nécessite la série d’adaptateurs de lentille FLD)
2,33 – 4,3 : 1 (WUXGA) / 2,5 – 4,6 (WQXGA) pour F70 et F90 3,51 – 6,45 : 1 (WQXGA et 4K UHD) pour F80 (nécessite la série d’adaptateurs de lentille FLD)
FLDX 0,8 - 1,21 : 1 (EN66) Mise au point courte
WUXGA 0,75 - 1,13 : 1 WQXGA/4K 0,80 - 1,21 : 1 F80 : 1,12 - 1,70 : 1 (WQXGA/4K UHD) (Le F80 requiert l’adaptateur de lentille R9801442)
WUXGA 0,75 - 1,13 : 1 WQXGA/4K 0,80 - 1,21 : 1 F80 : 1,12 - 1,70 : 1 (WQXGA/4K UHD) (Le F80 requiert l’adaptateur de lentille R9801442)
FLDX 0,61 : 1 (EN67)
Plage de mise au point : 0,5-4,0 m<br> Ratio de projection<br><br> WUXGA 0,57:1<br> WQXGA/4K 0,61:1<br> F80 : 0,85:1 (WQXGA/4K UHD)<br> (F80 nécessite l'adaptateur de lentille R9801442)
Plage de mise au point : 0,5-4,0 m<br> Ratio de projection<br><br> WUXGA 0,57:1<br> WQXGA/4K 0,61:1<br> F80 : 0,85:1 (WQXGA/4K UHD)<br> (F80 nécessite l'adaptateur de lentille R9801442)
FLDX 1,2 - 1,7 : 1 (EN63)
WUXGA 1,12-1,58:1 WQXGA/4K 1,20-1,70:1 F80 : 1,59 - 2,24 : 1 (WQXGA/4K UHD) (F80 nécessite l'adaptateur de lentille FLD/FLD+)
WUXGA 1,12-1,58:1 WQXGA/4K 1,20-1,70:1 F80 : 1,59 - 2,24 : 1 (WQXGA/4K UHD) (F80 nécessite l'adaptateur de lentille FLD/FLD+)
FLDX 1.7-2.5:1 (EN61)
WUXGA 1,58-2,33:1 WQXGA/4K 1,70-2,50:1 F80 : 2,38 – 3,51 : 1 (WQXGA/4K UHD) (Le F80 requiert l’adaptateur de lentille R9801442)
WUXGA 1,58-2,33:1 WQXGA/4K 1,70-2,50:1 F80 : 2,38 – 3,51 : 1 (WQXGA/4K UHD) (Le F80 requiert l’adaptateur de lentille R9801442)
Lentille FLDX 0,38:1 UST 90°
WUXGA 1,12-1,58:1 WQXGA/4K 1,20-1,70:1 F80 : 1,68 – 2,38 : 1 (WQXGA/4K UHD) (Le F80 requiert l’adaptateur de lentille FLD / FLD+)
WUXGA 1,12-1,58:1 WQXGA/4K 1,20-1,70:1 F80 : 1,68 – 2,38 : 1 (WQXGA/4K UHD) (Le F80 requiert l’adaptateur de lentille FLD / FLD+)
Lentille à distance de projection ultracourte FLD+ 0,28:1 (EN68)
F35 / F70 / F90 : 0,28 : 1 (1080/WUXGA) 0,30 : 1 (WQXGA/4K UHD)
F35 / F70 / F90 : 0,28 : 1 (1080/WUXGA) 0,30 : 1 (WQXGA/4K UHD)
UST-LENS SUPPORT FOR 90° F-SERIES LENS
Média, brochures, présentations, livres blancs, supports marketing... Retrouvez toutes nos ressources marketing dans notre plateforme de téléchargement nouvelle génération
Visiter le Media CenterProduits similaires
Vous cherchez des documents techniques ou une assistance produit ?
Pour les téléchargements techniques, comme les pilotes, le firmware, les manuels, les dessins et la documentation, nous vous invitons à consulter notre page assistance produit.
Consultez l'assistance produit